Laser ablation of copper based alloys by single and double pulse laser induced breakdown spectroscopy

Single and double pulse laser induced breakdown spectroscopy was applied to the analysis of copper based alloys samples, in order to investigate the material ablation process under two different experimental conditions. An Nd:YAG laser, emitting at the fundamental wavelength (1064 nm) for a fixed value of total energy with the same pulse width, has been used for both set-up configurations. Certified samples of copper based alloys were examined in order to investigate the effect of their different compositions on the ablation process efficiency. The craters produced by the laser on the samples surfaces were measured by a contact profilometer in order to evaluate the mass of ablated material. In this respect the differences in behaviour of the single and the double pulse ablation for Laser Induced Breakdown Spectroscopy (LIBS), respectively, have been considered. The dependence, under the same experimental conditions, of the LIBS background emission of the different ablated masses of the material has also been investigated, by looking for normalization algorithms for quantitative data reduction.The behaviour of some peculiar intensity ratios, suitable for building calibration curves, has been studied in order to evaluate the trend in fractionated evaporation on going from the single pulse to the double pulse technique. PACS 52.70.-m; 52.50.Jm; 42.62.Fi