首页 | 本学科首页   官方微博 | 高级检索  
     检索      

电子束在微束斑X射线源中运动轨迹的计算
引用本文:王凯歌,牛憨笨,周燕.电子束在微束斑X射线源中运动轨迹的计算[J].计算物理,2003,20(1):21-24.
作者姓名:王凯歌  牛憨笨  周燕
作者单位:1. 中国科学院西安光学精密机械研究所 光电子部, 陕西 西安 710068;2. 北京理工大学信息工程学院光电工程系, 北京 100081
基金项目:国家自然科学基金(69878033)资助项目
摘    要:轰击金属靶面的高能电子束束斑大小,是决定微束斑X射线源最终X射线束斑尺寸的关键因素之一.当LaB6晶体阴极发射电流为60μA时,采用5点不等距有限差分法(FDM)计算了整个仪器内旋转对称电子光学系统电场的分布,并利用Runge Kutta法从LaB6阴极发射端面开始追踪了电子束在整个系统内部的运动,经计算,聚焦在靶面上的电子束斑直径约为600~1000nm.

关 键 词:有限差分法  最佳因子  微束斑X射线源  Runge-Kutta法  
文章编号:1001-246X(2003)01-0021-04
收稿时间:2001-04-24
修稿时间:2001年4月24日

Simulation of Electron Beam Tracing in the X-ray Source with Microbeam
WANG Kai-ge,NIU Han-ben,ZHOU Yan.Simulation of Electron Beam Tracing in the X-ray Source with Microbeam[J].Chinese Journal of Computational Physics,2003,20(1):21-24.
Authors:WANG Kai-ge  NIU Han-ben  ZHOU Yan
Institution:1. Xi'an Institute of Optics & Precision Mechanics, Academia Sinica, Xi'an 710068, China;2. Department of Photoelectronics Engineering, Beijing Institute of Technology, Beijing 100081, China
Abstract:The focal dimension of the X-ray source with microbeam is in proportion to the size of the e-beam focused on the target surface. The finite difference method is utilized to calculate the distribution of the electrical-field intensity. The track of the electron-beam is traced by using the Runge-Kutta method within the whole symmetrical system. As a result, the diameter of the electron beam focus is 0.6-1.0μm while the total high brightness emission of the LaB6 crystal cathode is 0.06-0.3mA.
Keywords:finite difference method  optimal coefficient  X ray source with microbeam  Runge Kutta method
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《计算物理》浏览原始摘要信息
点击此处可从《计算物理》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号