Whistling of a pipe system with multiple side branches: Comparison with corrugated pipes

Corrugated pipes are widely used because they combine local rigidity with global flexibility. Whistling induced by flow through such pipes can lead to serious environmental and structural problems. The whistling of a multiple side branch system is compared to the whistling behavior of corrugated pipes. The study has been restricted to cavities with sharp edges which are convenient for theoretical modeling. The side branch depth is chosen to be equal to the side branch diameter, which corresponds to cavity geometries in typical corrugated pipes. The low frequency resonance modes of the multiple side branch system have been predicted by means of acoustic models, of which the validity has been tested experimentally. Several experiments have been carried out for characterizing the whistling behavior of the system. While the behavior of a multiple side branch system is interesting on its own it can be compared to that of corrugated pipes. These experiments show that the multiple side branch system is in many aspects a reasonable model for corrugated pipes. Advantage of the multiple side branch system is that it is an experimental setup allowing easy modification of cavity depth. We used this feature to identify the pressure nodes of the acoustic standing wave along the main pipe as the regions where sound is produced. This contradicts recent publications on corrugated pipes. Another interesting aspects is that the system appears to whistle at the second hydrodynamic mode of the cavities rather than at the first hydrodynamic mode. A prediction model for the whistling behavior is proposed, consisting of an energy balance, based on the vortex sound theory. The model predicts the observed Strouhal number but overestimates the acoustic fluctuation amplitude by a factor four.