CLAM钢冲击和拉伸性能测试与研究

对中国低活化马氏体钢——CLAM钢的冲击和拉伸性能进行了测试。结果表明:CLAM钢的塑。脆转变温度在-100℃左右，低于国际上其它几种典型的低活化马氏体钢；在室温和600℃时抗拉强度分别为668和334MPa，类似于EUROFER97的性能。约8μm的晶粒尺寸是CLAM钢具有较好冲击和拉伸性能的主要原因之一。The impact and tensile tests were carried out on the China Low Activation Martensitic steels （CLAM）. The results show: the Ductile-Brittle Transition Temperature （DBTY） is about - 100 ℃, which is lower than those of some other RAFMs; The ultimate strength are 668 MPa at room temperature and 334 MPa at 600℃, which are comparable to those of EUROFER97. The finer grain size of about 8 μm was considered as one of reasons for the superior mechanical properties of CLAM.

Study on Impact and Tensile Properties of CLAM Steel

The impact and tensile tests were carried out on the China Low Activation Martensitic steels （CLAM）. The results show: the Ductile-Brittle Transition Temperature （DBTY） is about - 100 ℃, which is lower than those of some other RAFMs; The ultimate strength are 668 MPa at room temperature and 334 MPa at 600℃, which are comparable to those of EUROFER97. The finer grain size of about 8 μm was considered as one of reasons for the superior mechanical properties of CLAM.