三级GEM探测器的增益一致性实验研究

随着二维GEM气体探测器在X射线成像探测领域的应用， 三级GEM的探测结构和电场均匀性带来的增益一致性修正问题， 成为需要深入研究的课题内容。 介绍了有效探测面积为100 mm×100 mm的三级倍增GEM探测器， 共采用100路阵列读出， 每路读出Pad面积为9.5 mm×9.5 mm。 测量了55Fe放射源准直入射的全能峰谱。 实验表明， 随着时间的变化， 探测器的增益基本上保持稳定； 随气流的增大， 增益由变化明显到变化不大。 GEM探测器各个阵列单元的增益一致性良好（>80%）； 能量分辨率在0.18～0.22之间， 运用最小二乘法拟合给出增益一致性的修正结果， 修正后相差约0.1， 为GEM气体探测器的增益一致性修正方法提供了参考方案。 With the application of the two dimensional GEM gaseous detector in X ray imaging, the correction method of gain uniformity caused by triple GEM avalanche structures and electric field uniformity should be studied. The paper reported the study of the triple GEM detector with effective area 100 mm×100 mm used the Pad’s size of 9.5 mm×9.5 mm. In the test, 100 readout channels were designed. Results showed that gain remained stable over time; as air flow increases, gain from increases obviously to changes very little. Particularly, triple GEM’s gain uniformity was very good (more than 80%) and the range of energy resolution was from 0.18 to 0.22. To improve gain consistency of results, the difference value revised was obtained to be about 0.1 by the least square method. It provided a better method to improve gain uniformity of GEM detector.

Gain Uniformity Experimental Study Performed on Triple GEM Gas Detector

With the application of the two dimensional GEM gaseous detector in X ray imaging, the correction method of gain uniformity caused by triple GEM avalanche structures and electric field uniformity should be studied. The paper reported the study of the triple GEM detector with effective area 100 mm×100 mm used the Pad’s size of 9.5 mm×9.5 mm. In the test, 100 readout channels were designed. Results showed that gain remained stable over time; as air flow increases, gain from increases obviously to changes very little. Particularly, triple GEM’s gain uniformity was very good (more than 80%) and the range of energy resolution was from 0.18 to 0.22. To improve gain consistency of results, the difference value revised was obtained to be about 0.1 by the least square method. It provided a better method to improve gain uniformity of GEM detector.