首页 | 本学科首页   官方微博 | 高级检索  
     检索      

用一根光纤光栅实现温度与应变的同时测量
引用本文:关柏鸥,Tam H Y,Ho S L,Liu S Y,董孝义.用一根光纤光栅实现温度与应变的同时测量[J].光学学报,2000,20(6):21-826.
作者姓名:关柏鸥  Tam H Y  Ho S L  Liu S Y  董孝义
作者单位:1. 香港理工大学电机工程系,香港;南开大学现代光学研究所,天津,300071
2. 香港理工大学电机工程系,香港
3. 南开大学现代光学研究所,天津,300071
摘    要:报道了一种用一根光纤光栅实现温度与应变同时测量的新方案。用于同时传感温度与应变的光纤光栅写于两种不同光纤的连接处,本身具有两个反射峰。将其中半个光栅粘于热膨胀系数较大的基底材料上,这样,两个反射峰便具有不同的温度及应变响应,由此实现温度与应变的同时测量。

关 键 词:光纤光栅  传感  应变  温度  传感器
收稿时间:1999/5/10

Simultaneous Measurement of Strain and Temperature Using a Single Fiber Bragg Grating
Guan Baiou,Tam H Y,Ho S L,Liu S Y,Dong Xiaoyi.Simultaneous Measurement of Strain and Temperature Using a Single Fiber Bragg Grating[J].Acta Optica Sinica,2000,20(6):21-826.
Authors:Guan Baiou  Tam H Y  Ho S L  Liu S Y  Dong Xiaoyi
Institution:Guan Baiou 1),2) Tam H Y 1) Ho S L 1) Liu S Y 1) Dong Xiaoyi 2) 1),Department of Electrical Engineering,The Hong Kong Polytechnic University,Hong Kong 2),Institute of Modern Optics,Nankai University,Tianjin 3000
Abstract:A new approach for simultaneous measurement of strain and temperature using a single fiber Bragg grating is proposed and demonstrated. The fiber Bragg grating used for simultaneous measurement of strain and temperature was written on the joint of two different fibers, and has two reflection peaks at different wavelength. One section of the grating was bonded onto the substrate with large thermal expansion coefficient, so, the two reflection peaks show different strain and temperature response, and strain and temperature can be measured simultaneously.
Keywords:fiber Bragg grating    sensing    strain    
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号