首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于叠栅条纹的光刻对准理论分析及标定方法
引用本文:朱江平,胡松,于军胜,唐燕,周绍林.基于叠栅条纹的光刻对准理论分析及标定方法[J].光学学报,2012,32(6):607001-40.
作者姓名:朱江平  胡松  于军胜  唐燕  周绍林
作者单位:朱江平:中国科学院光电技术研究所, 四川 成都 610209电子科技大学光电信息学院, 四川 成都 610054中国科学院研究生院, 北京 100049
胡松:中国科学院光电技术研究所, 四川 成都 610209
于军胜:电子科技大学光电信息学院, 四川 成都 610054
唐燕:中国科学院光电技术研究所, 四川 成都 610209
周绍林:中国科学院光电技术研究所, 四川 成都 610209
基金项目:国家科学自然基金(61076099)和国家863计划(2009AA03Z341)资助课题。
摘    要:在线光栅用于纳米光刻对准理论的基础上,为实现光栅方向的标定和掩模硅片对准,提出一种利用相位斜率消除角位移的新方法,并给出线光栅标记及其对准原理。在对准前,掩模对准标记和硅片对准标记存在角位移,重点讨论了此种情况下叠栅条纹的特性以及与光栅物理参数的关系,并给出了相应的计算公式。基于傅里叶频域分析法,对叠栅条纹频率成分与条纹的关系做了简要分析。利用提取叠栅条纹行列方向的一维相位,通过数据拟合,得出了相位斜率与角位移的内在关系,实现了条纹方向的标定。模拟实验结果表明,该方法简单可靠,可分辨的最小角位移低于0.02°。

关 键 词:傅里叶光学  光刻对准  角位移  叠栅条纹  相位斜率  线光栅标记
收稿时间:2011/11/29

Theoretical Analysis of Photolithography Alignment and Calibration Method Based on Moiré Fringes
Zhu Jiangping,Hu Song,Yu Junsheng,Tang Yan,Zhou Shaolin.Theoretical Analysis of Photolithography Alignment and Calibration Method Based on Moiré Fringes[J].Acta Optica Sinica,2012,32(6):607001-40.
Authors:Zhu Jiangping  Hu Song  Yu Junsheng  Tang Yan  Zhou Shaolin
Institution:1 Institution of Optics and Electronics,Chinese Academy of Sciences,Chengdu,Sichuan610209,China2 School of Optoelectronic Information,University of Electronic Science and Technology of China,Chengdu,Sichuan610054,China3 Graduate University of Chinese Academy of Sciences,Beijing 100049,China
Abstract:To realize the calibration of grating direction and alignment between mask and wafer, on the basis of theory of line grating used for photolithography alignment, a novel method for eliminating angular displacement using phase slope is proposed. Line grating masks and their alignment principle are also given. Before alignment, there exists angular displacement between mask alignment marks and wafer alignment masks. The nature of Moiré fringes and their relation with physical parameters of grating are mainly discussed, and the corresponding calculation formulas are obtained. According to Fourier method of frequency domain, relation between Moiré fringe frequency components and stripes is briefly analyzed. Using extracted one dimensional phase of Moiré fringes in ranks, inner relation between phase slope and angular displacement is obtained by data fitting, and calibration of stripe direction is realized. Simulation experimental results show that this method is simple and reliable, minimum angular displacement with less than 0.02° can be identified.
Keywords:Fourier optics  photolithography alignment  angular displacement  Moiré fringe  phase slope  line grating mark
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号