首页 | 本学科首页   官方微博 | 高级检索  
     检索      

多腔薄膜梳状滤波器中心波长温度稳定性分析
引用本文:陈海星,顾培夫,李海峰,章岳光,吕玮阁,金波.多腔薄膜梳状滤波器中心波长温度稳定性分析[J].光学学报,2005,25(1):05-108.
作者姓名:陈海星  顾培夫  李海峰  章岳光  吕玮阁  金波
作者单位:浙江大学现代光学仪器国家重点实验室,杭州,310027;浙江大学现代光学仪器国家重点实验室,杭州,310027;浙江大学现代光学仪器国家重点实验室,杭州,310027;浙江大学现代光学仪器国家重点实验室,杭州,310027;浙江大学现代光学仪器国家重点实验室,杭州,310027;浙江大学现代光学仪器国家重点实验室,杭州,310027
摘    要:利用高桥模型详细分析了多腔薄膜梳状滤波器的中心波长温度稳定性问题。发现由于多腔薄膜梳状滤波器的固体腔较厚而反射镜膜系的厚度相对较薄,因此膜系与固体腔之间的温度引起的弹性应力导致的膜系光学常数的变化已经不是主要影响因素,而固体腔材料的折射率温度系数引起的中心波长漂移对整个器件的影响较大。计算表明对于一个密集波分复用中使用的100 G信道间隔的三腔薄膜梳状滤波器而言,当固体腔材料(熔融石英)的折射率温度系数为1×10-5/℃时,器件的中心波长漂移在-40 ℃~85 ℃的温度范围内可达±1 nm。

关 键 词:薄膜光学  梳状滤波器  高桥模型  温度稳定性
收稿时间:2003/12/15

Analysis of the Temperature Stability of Center Wavelength for the Thin Film Interleaver with Multicavity
Chen Haixing,Gu Peifu,Li Haifeng,Zhang Yueguang,Li Weige,Jin Bo.Analysis of the Temperature Stability of Center Wavelength for the Thin Film Interleaver with Multicavity[J].Acta Optica Sinica,2005,25(1):05-108.
Authors:Chen Haixing  Gu Peifu  Li Haifeng  Zhang Yueguang  Li Weige  Jin Bo
Abstract:The analysis on the temperature stability of center wavelength for the thin film interleaver with multicavity by Takahashi model is presented. It is found that the change of optical constant caused by the interactional elastic force between the reflector thin film stack and the cavity with the temperature change is not the main reason affecting the shift of center wavelength of the device, however, the temperature coefficient of the refractive index of cavity material is the important factor. The simulated calculation showed that the total shift of the device with the temperature vibration from -40 ℃ to 85 ℃ would reach ±1 nm or so for a three-cavity thin film interleaver used in dense wavelength division multiplexer (DWDM) with 100 G channel interval.
Keywords:thin film optics  interleaver  Takahashi model  temperature stability
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号