首页 | 本学科首页   官方微博 | 高级检索  
     检索      

超薄金膜-发光层-光子晶体三明治结构的光学特性及荧光调制
引用本文:陈元浩,刘桂强,龚丽霞,唐发林,黎磊,黄宽.超薄金膜-发光层-光子晶体三明治结构的光学特性及荧光调制[J].光学学报,2012,32(10):1016001-175.
作者姓名:陈元浩  刘桂强  龚丽霞  唐发林  黎磊  黄宽
作者单位:陈元浩:江西师范大学物理与通信电子学院, 江西 南昌 330022江西省光电子与通信重点实验室, 江西 南昌 330022
刘桂强:江西师范大学物理与通信电子学院, 江西 南昌 330022江西省光电子与通信重点实验室, 江西 南昌 330022
龚丽霞:江西师范大学物理与通信电子学院, 江西 南昌 330022江西省光电子与通信重点实验室, 江西 南昌 330022
唐发林:江西师范大学物理与通信电子学院, 江西 南昌 330022江西省光电子与通信重点实验室, 江西 南昌 330022
黎磊:江西师范大学物理与通信电子学院, 江西 南昌 330022江西省光电子与通信重点实验室, 江西 南昌 330022
黄宽:江西师范大学物理与通信电子学院, 江西 南昌 330022江西省光电子与通信重点实验室, 江西 南昌 330022
基金项目:国家自然科学基金(11004088)、江西省自然科学基金(2010GQW0025)、江西省科技攻关项目(20112BBE50033)和江西省教育厅科技项目(GJJ10099)资助课题。
摘    要:结合垂直沉积自组装法和旋涂法制备了由超薄金膜、发光层和三维光子晶体组成的三明治结构。通过对样品的衰减全反射曲线进行测量和分析,发现该三明治结构的光学特性取决于光子晶体的质量,高质量三维光子晶体使得三明治结构的衰减全反射曲线在48°和63°两个位置出现了反射波谷,而低质量三维光子晶体的三明治结构的反射波谷完全消失。与薄金膜-发光层双层结构相比,该三明治结构的荧光特性曲线也出现了显著变化,单一辐射峰分裂为双峰,且位于600nm的辐射峰比位于620nm处的辐射峰要弱30%。

关 键 词:光学制造  光子晶体  自组装  表面等离子体  表面模式  耦合
收稿时间:2012/4/6

Optical Properties and Fluorescence Modification of the Sandwich Structure Composed of Ultra-Thin Gold films, Light-Emitting Layers and Photonic Crystals
Chen Yuanhao,Liu Guiqiang,Gong Lixia,Tang Falin,Li Lei,Huang Kuan.Optical Properties and Fluorescence Modification of the Sandwich Structure Composed of Ultra-Thin Gold films, Light-Emitting Layers and Photonic Crystals[J].Acta Optica Sinica,2012,32(10):1016001-175.
Authors:Chen Yuanhao  Liu Guiqiang  Gong Lixia  Tang Falin  Li Lei  Huang Kuan
Institution:1,2 1 Institute of Physics and Communication Electronics,Jiangxi Normal University,Nanchang,Jiangxi 330022,China 2 Key Laboratory of Optoelectronic and Telecommunication of Jiangxi,Nanchang,Jiangxi 330022, China
Abstract:Sandwich structures composed of an ultra-thin gold film, a light-emitting layer and a three-dimensional (3D) photonic crystal (PC) are fabricated by the vertical deposition method and spin-coating method. Attenuated total reflection measurements show that the 3D PC plays a crucial role in the formation of significant optical properties. For the sandwich structure with a high-quality 3D PC, two reflection troughs are clearly observed at the incidence angles of 48° and 63°, while the reflection troughs disappear in the attenuated total reflection curves of the sandwich structures for those with a low-quality 3D PC. Compared with the two-layer structures of ultra-thin gold film and light-emitting layer, pronounced changes are found in the curves of the fluorescence properties of the sandwiches, the single emitting peak at 600 nm of quantum dots (QDs) is split into two peaks, and the intensity of peak positioned at 600 nm is weaker than that positioned at 620 nm by 30%.
Keywords:optical fabrication  photonic crystals  self-assembly  surface plasmons  surface modes  coupling
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号