基于KW01的无线RFID读卡系统设计 |
| |
引用本文: | 曹国平,王宜怀,黄鑫,唐灯平.基于KW01的无线RFID读卡系统设计[J].应用声学,2015,23(12):82-82. |
| |
作者姓名: | 曹国平 王宜怀 黄鑫 唐灯平 |
| |
作者单位: | 苏州大学计算机科学与技术学院 江苏 苏州,苏州大学计算机科学与技术学院 江苏 苏州,昆山鑫盛盟创科技有限公司 江苏 昆山,苏州大学计算机科学与技术学院 江苏 苏州 |
| |
基金项目: | 国家自然科学基金项目(面上项目,重点项目,重大项目) |
| |
摘 要: | 针对以Mifare卡为基础的传统有线RFID系统组网复杂,成本高等问题,采用飞思卡尔2014年最新推向市场的KW01 MCU(集成ARM Cortex-M0+内核与Zigbee Sub-1G无线射频收发器)与射频芯片 MF RC531开发了一套无线RFID读卡系统,以构件化思想设计了系统各模块的硬件电路,封装了KW01与RC531的底层软件驱动构件,并以此为基础给出了结构清晰的工程框架,降低了系统开发的难度,提高了系统的可扩展性与可移植性;同时在软件设计中移植了飞思卡尔SMAC无线精简协议栈实现网络组建,并改进了通信协议与数据收发机制。在433M频率下的测试表明系统节点通信距离远、功耗低、性能稳定,达到了预期要求。
|
关 键 词: | 无线读卡器 工程框架 无线协议栈 |
收稿时间: | 2015/8/21 0:00:00 |
修稿时间: | 2015/9/28 0:00:00 |
The Wireless RFID Card Reader System Design Based On KW01 Processor |
| |
Abstract: | Aiming at the complex network and high cost of the traditional wired RFID system, This paper introduces a wireless RFID card reader system based on the MCU KW01 (ARM Cortex-M0+), describes the design of component circuit of KW01 and MF RC531, and a RFID component engineering framework and universal component to achieve more efficient software design, ameliorates and transplants SMAC protocol stack to implement Sub-1GHz wireless communication. Test results prove that the system has low power consumption and stability performance which is useful in practical engineering. |
| |
Keywords: | RFID card reader KW01 engineering framework SMAC Protocol |
|
| 点击此处可从《应用声学》浏览原始摘要信息 |
| 点击此处可从《应用声学》下载免费的PDF全文 |
|