| 压电换能器等效模型分析与阻抗匹配设计 |
| |
| 引用本文： | 李晓,宋雁鹏,王志斌,杨常青,薛锐,于慧,吴传超.压电换能器等效模型分析与阻抗匹配设计[J].应用声学,2016,35(1):13-19. |
| |
| 作者姓名： | 李晓 宋雁鹏 王志斌 杨常青 薛锐 于慧 吴传超 |
| |
| 作者单位： | 山西省光电信息与仪器工程技术研究中心,山西省光电信息与仪器工程技术研究中心,山西省光电信息与仪器工程技术研究中心,山西省光电信息与仪器工程技术研究中心,山西省光电信息与仪器工程技术研究中心,山西省光电信息与仪器工程技术研究中心,山西省光电信息与仪器工程技术研究中心 |
| |
| 基金项目： | 国际科技合作项目（2013DFR10150，2012DFA10680）;国家自然科学基金项目（面上项目，重点项目，重大项目）（61127015） |
| |
| 摘 要： | 声光可调滤光器(Acousto-optic tunable filter,AOTF)的衍射效率不仅与功率信号源的质量、声光晶体氧化碲(TeO_2)的切型有关,而且压电超声换能器的结构以及其阻抗匹配网络也对AOTF的衍射效率有很大影响。本文对X切型铌酸锂(LiNbO_3,LN)四层镀膜压电超声换能器的等效模型进行了分析,确定了声光介质存在时换能器的阻抗特性,利用射频微波仿真软件,设计了电感-电容复合匹配网络。将换能器压合在TeO_2上,用复色光作为光源进行了声光衍射实验,经仿真与实验验证表明,该匹配电路可以有效的改善压电换能器的阻抗特性,提高换能器带宽,提高能量传输效率,AOTF衍射效率最高可达92.67%。
|
| 关 键 词： | AOTF 声光 衍射 压电换能器 阻抗匹配 |
| 收稿时间： | 2015/4/20 0:00:00 |
| 修稿时间： | 2015/12/21 0:00:00 |
The analysis of piezoelectric transducer equivalent impedance model and design of ipmedance matching circuit |
| |
| lixiao,song yan peng,wang zhi bin,yang chang qing,xuerui,yu hui and wu chuan chao.The analysis of piezoelectric transducer equivalent impedance model and design of ipmedance matching circuit[J].Applied Acoustics,2016,35(1):13-19. |
| |
| Authors: | lixiao song yan peng wang zhi bin yang chang qing xuerui yu hui and wu chuan chao |
| |
| Institution: | Shanxi Provincal Research Center for Opto-electronic Information and Instrument Enginering Technology,Shanxi Provincal Research Center for Opto-electronic Information and Instrument Enginering Technology,Shanxi Provincal Research Center for Opto-electronic Information and Instrument Enginering Technology,Shanxi Provincal Research Center for Opto-electronic Information and Instrument Enginering Technology,Shanxi Provincal Research Center for Opto-electronic Information and Instrument Enginering Technology,Shanxi Provincal Research Center for Opto-electronic Information and Instrument Enginering Technology,Shanxi Provincal Research Center for Opto-electronic Information and Instrument Enginering Technology |
| |
| Abstract: | The diffraction efficiency of Acousto-Optic Tunable Filter(AOTF) not only related to the quality of the power source,the cutting type of acousto-optic crystal oxidation tellurium (TeO2), the structure of the piezoelectric ultrasonic transducer and the impedance matching also has a great influence on the diffraction efficiency of AOTF. In this paper,we analyze the equivalent model of X cutting type lithium niobate(LiNbO3, LN) piezoelectric ultrasonic transducer with four layer coating, and determine the impedance characteristic of transducer while the acousto-optic medium is exist, using microwave simulation software, compound matching network of inductance and capacitance is designed.In order to do the diffraction experiment,we stitching transducer on TeO2, using colored light as a light source,the result of simulation and experiment show that the matching circuit can effectively improve the impedance characteristics of piezoelectric transducer,improve the bandwidth of transducer,improve the efficiency of energy transmission,and the diffraction efficiency of AOTF reach up to 92.67%. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《应用声学》浏览原始摘要信息 |
| 点击此处可从《应用声学》下载免费的PDF全文 |
|
