首页 | 本学科首页   官方微博 | 高级检索  
     检索      

具有阻抗匹配层的宽带纵向振动压电换能器设计
引用本文:陈航,张允孟,李志舜.具有阻抗匹配层的宽带纵向振动压电换能器设计[J].应用声学,2001,20(2):31-34,22.
作者姓名:陈航  张允孟  李志舜
作者单位:西北工业大学航海工程学院
摘    要:本文研究纵向振动压电换能器的频带展宽问题。在复合棒纵向换能器的辐射端加工适当材料的阻抗匹配层,可以使其工作在非单谐振状态下,在单层阻抗匹配层的情况下,合理地选择匹配层的厚度可以调整其谐振点之间的位置,从而改善换能器的辐射特性。本研究结果表明,对于机械品质因素Qm=6,发射响应带宽△f=4kHz的纵向振子,采用四分之一波长厚度的匹配层,在不降低发射响应的条件下,可展宽频带一倍以上。

关 键 词:阻抗匹配层  纵向振动压电换能器  发射响应带宽

Design of wide-band longitudinal mode piezoelectric transducers with impedance matching layers
Chen Hang,Zhang Yunmeng and Li Zhishun.Design of wide-band longitudinal mode piezoelectric transducers with impedance matching layers[J].Applied Acoustics,2001,20(2):31-34,22.
Authors:Chen Hang  Zhang Yunmeng and Li Zhishun
Abstract:The article study widening band of longitudinal mode piezoelectric transducers.The non-single resonance characteristics appear by forming proper impedance matching layers on the radiative surface of longitudinal mode piezoelectric transducer.The places of resonance points can be adjusted,and the radiated characteristic of transducer with single matching layers was improved by choosing the length of matching layer reasonably.The research on the transducer having mechanical quality factor Qm=6,bandwidth of transmitting sensitivity △f=4kHz presents that,using quarter matching layer,two times bandwidth was achieved in same transmitting sensitivity.
Keywords:Impedance matching layer  Longitudinal mode piezoelectric transducers  Bandwidth of transmitting sensitivity  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《应用声学》浏览原始摘要信息
点击此处可从《应用声学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号