首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于广义合成阻抗超声传感器电端匹配的研究
引用本文:张佳民,杨宁.基于广义合成阻抗超声传感器电端匹配的研究[J].应用声学,2009,28(3):238-240.
作者姓名:张佳民  杨宁
作者单位:上海电力学院,上海,200090
基金项目:上海市重点学科建设项目 
摘    要:超声波测距具有非接触、高准确度、价格低和使用方便等优点,被广泛应用于工业生产、医学检查、日常生活,如无人驾驶汽车、机器人、液位计等。在这些应用中,超声波传感器是应用中的最关键部件之一。因此,本文在分析了超声波传感器在谐振频率点等效电路的基础上,分别采用无源电感和有源电感对超声换能器的发射探头和接收探头进行电端匹配,提高了收发探头的效率。实验表明,匹配方法是有效的。

关 键 词:超声波传感器  电端匹配  广义合成阻抗  测距

Electric matching of ultrasonic sensor based on general impedance converter
ZHANG Jia-Min and YANG Ning.Electric matching of ultrasonic sensor based on general impedance converter[J].Applied Acoustics,2009,28(3):238-240.
Authors:ZHANG Jia-Min and YANG Ning
Institution:ZHANG Jia-Min YANG Ning (Shanghai University of Electric Power,Shanghai 200090)
Abstract:The technology of measuring distance by ultrasonic signal with advantages of non-contact,high accuracy,low cost,user-friendliress has been used widely in industries production,medical inspection,and daily life,such as AGV,robot,liquid level meter,and so on. In these applications,ultrasonic sensor is one of the major critical components.Based on analyzing the equivalent circuit of ultrasonic sensor at resonance frequency,the efficiency of ultrasonic transducers can be improved by the matching circuit using passive inductance or active inductance.Experimental results show that this proposed matching method is effective.
Keywords:Ultrasonic sensor  Electric matching  General impedance converter  Distance measurement
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《应用声学》浏览原始摘要信息
点击此处可从《应用声学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号