首页 | 本学科首页   官方微博 | 高级检索  
     检索      

超声双折射法测试铝合金的内部应力
引用本文:魏勤,董师润,徐秉汉,徐颖梅.超声双折射法测试铝合金的内部应力[J].应用声学,2008,27(5):401-406.
作者姓名:魏勤  董师润  徐秉汉  徐颖梅
作者单位:1. 江苏科技大学数理学院,镇江,212003
2. 中国船舶科学研究中心,无锡,214082
基金项目:江苏省船舶先进设计制造技术重点实验室开放课题
摘    要:声各向同性的金属材料在应力作用下表现出声各向异性,这是用声弹性法分析材料内部应力的基础。本文用偏振方向平行或垂直于应力方向的超声纯横波对LY11型铝合金进行测试。实验结果表明:材料在拉、压单轴应力作用下,偏振方向平行和垂直于应力方向的超声纯横波的声速都发生了变化。实验在分析材料声各向异性的基础上计算材料声弹性双折射系数,得到测试LY11型铝合金内部应力的理论公式,并对其内部的残余应力进行评估。实验中利用双换能器回振法测量声速,时间测试精确度可达10-11s,可精确测量声速的微小变化量。

关 键 词:声双折射  回振法  应力测试  残余应力

Measurement of stress in aluminum alloy by acoustic birefringence
WEI Qin,DONG Shi-Run,XU Bing-Han and XU Ying-Mei.Measurement of stress in aluminum alloy by acoustic birefringence[J].Applied Acoustics,2008,27(5):401-406.
Authors:WEI Qin  DONG Shi-Run  XU Bing-Han and XU Ying-Mei
Institution:1 (1 Department of Physics,Jiangsu University of Science and Technology,Zhenjiang Jiangsu 212003)(2 China Ship Scientific Research Center,Wuxi Jiangsu 214082)
Abstract:Acoustic anisotropy effect occurs when a isotropic metal is submitted to stress which is the base of measurement of stress in material by acoustoelastic effect.In this pa- per,orthogonally polarized pure mode shear waves were used to test LY11 Aluminum al- loy.Experimental results show that the presence of stress causes small changes in phase velocities of shear waves,which is called acoustoelastic birefringence effect.The acous- toelastic coefficients are acquired by the analysis of the acoustic anisotropy,and theoretical equations of measuring stress in material are obtained.Furthermore,the residual stress is evaluated.The phase velocities are measured by a sing-around method by which small changes in velocity can be detected.The precision of time interval can reach to 1011s.
Keywords:Acoustic birefringence  Sing-around methods  Stress measurement  Residual stress
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《应用声学》浏览原始摘要信息
点击此处可从《应用声学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号