首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于多元线性回归法的液体阴极辉光放电-原子发射光谱分析研究
引用本文:郑培超,翟翔,王金梅,杨蕊.基于多元线性回归法的液体阴极辉光放电-原子发射光谱分析研究[J].光谱学与光谱分析,2017,37(10).
作者姓名:郑培超  翟翔  王金梅  杨蕊
作者单位:重庆邮电大学光电工程学院,重庆,400065
基金项目:重庆市基础与前沿研究计划一般项目,重庆市教委科技项目,重庆市基础与前沿研究计划重点项目,留学归国人员科研启动基金
摘    要:液体阴极辉光放电-原子发射光谱是近些年兴起的一种水体金属元素检测技术。该技术具有开放大气环境工作,进样简便,体积小,运行费用低,可同时检测多种金属元素等显著特征。根据之前的研究工作可知,金属元素的浓度不仅与自身的某一条谱线强度有关,而且还与自身其他的谱线或者基体中其他元素的谱线强度有关。为提高该技术的检测能力和精度,降低实验过程中基体效应的影响,以及更加充分地利用光谱信息,采用多元线性回归法对光谱信息进行定量分析。选取PbⅠ368.35nm和PbⅠ405.78nm两条特征谱线,建立Pb元素浓度与这两条光谱线强度的二元线性回归方程;相比于标准曲线法,Pb元素的拟合度R2从0.986 5提高到0.998 7,两组Pb测试液的相对误差从34.00%和29.00%降低到14.20%和1.51%。为降低复杂成分中基体效应的影响,建立Na的浓度与NaⅠ589.38nm,ZnⅠ213.8nm,PbⅠ405.78nm和Hβ四条特征谱线强度的四元线性回归方程;拟合度R2从标准曲线法的0.955 8提高到0.995 6,两组Na测试液的相对误差从11.67%和14.71%降低到2.33%和3.57%。以上结果表明:相比于标准曲线法,多元线性回归法可以降低实验过程中基体效应的影响,并且能更加充分地利用光谱信息,能提高拟合度R2,以及降低测量的误差,从而提高液体阴极辉光放电-原子发射光谱定量分析金属元素的精度。

关 键 词:液体阴极辉光放电-原子发射光谱  金属元素测量  标准曲线法  多元线性回归法

Analysis of Solution Cathode Glow Discharge Atomic Emission Spectroscopy by the Multiple Linear Regression Method
ZHENG Pei-chao,ZHAI Xiang,WANG Jin-mei,YANG Rui.Analysis of Solution Cathode Glow Discharge Atomic Emission Spectroscopy by the Multiple Linear Regression Method[J].Spectroscopy and Spectral Analysis,2017,37(10).
Authors:ZHENG Pei-chao  ZHAI Xiang  WANG Jin-mei  YANG Rui
Abstract:In recent years,solution cathode glow discharge atomic emission spectroscopy (SCGD-AES),a booming technique for metal element determination in aqueous solution,has a large quantity of notable characteristics,such as working under atmos-pheric pressure,easy simple injection,little size,small volume,low operating costs,and simultaneous detection of multi-metal-elements.According to our previous researches,the concentration of metal elements was relative to not only one of its character-istic spectral lines,but also the other characteristic spectral lines of itself or the characteristic spectral lines of other elements.In order to improve the detection capability and accuracy of solution cathode glow discharge atomic emission spectroscopy,reduce the matrix effect in the complex solution and make full use of spectral information,the multivariate linear regression method was employed to make a quantitative analysis of spectral information.Two characteristic spectral lines of Pb Ⅰ 368.35 nm and Pb Ⅰ405.78 nm were employed to establish the binary linear regression equation;compared with standard curve method,the degree of fitting R 2 increased to 0.9987 from 0.9865,and the relative errors of two test solutions decreased to 14.20% and 1.51%from 34.00% and 29.00%,respectively.Quaternary linear regression equation using Na Ⅰ 589.38 nm,Zn Ⅰ 213.80 nm,PbⅠ 405.78 nm and Hβwere also built to reduce the matrix effect in the complex solution;compared with standard curve method, the degree of fitting R 2 increased to 0.9956 from 0.9558,and the relative errors of two test solutions decreased to 2.33% and 3.57% from 11.67% and 14.71%,respectively.The above results indicate that:compared with standard curve method,multi-variate linear regression method has the ability to reduce the influence of matrix effect in the complex aqueous solution,take full advantage of spectral information,improve degree of fitting (R 2 )and reduce the errors,thus improve the accuracy of metal ele-ments determination with solution cathode glow discharge atomic emission spectroscopy.
Keywords:Solution cathode glow discharge-atomic emission spectroscopy  Metal element determination  Standard curve meth-od  Multivariate linear regression method
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号