激光诱导击穿光谱技术成分面扫描分析与应用 |
| |
引用本文: | 陈启蒙,杜敏,郝中骐,邹孝恒,李嘉铭,易荣兴,李祥友,陆永枫,曾晓雁.激光诱导击穿光谱技术成分面扫描分析与应用[J].光谱学与光谱分析,2016(5):1473-1477. |
| |
作者姓名: | 陈启蒙 杜敏 郝中骐 邹孝恒 李嘉铭 易荣兴 李祥友 陆永枫 曾晓雁 |
| |
作者单位: | 华中科技大学,武汉光电国家实验室筹 激光与太赫兹功能实验室,武汉 湖北 430074 |
| |
基金项目: | 国家重大科学仪器设备开发专项目(2011YQ160017) |
| |
摘 要: | 为分析和检测铁矿石表面多成分的分布情况,采用532nm Nd∶YAG脉冲激光,设计面扫描分析方法,结合自行开发的软件,首先对标准样品进行面扫描分析,建立定标曲线,说明元素含量与谱线强度的关系。然后对由标准样品压制的表面元素含量分布不均匀的样品进行面扫描分析,生成二维分布图,并与样品表面形貌进行比较,验证了分析方法的正确性。最后以100μm的分辨率对天然铁矿石样品表面14mm×11mm范围内进行面扫描分析,得到其表面Ca,Al,Ti和Mn四种元素的分布情况,并将分析结果与铁矿石表面形貌相比较。结果表明,激光诱导击穿光谱技术作为一种成分分析方法,可以对不均匀样品的表面成分分布情况进行定性分析。
|
关 键 词: | 激光诱导击穿光谱 铁矿石 面扫描分析 成分分析 |
Mapping Applications in Laser-Induced Breakdown Spectroscopy |
| |
Abstract: | LIBS mapping was used to analyze and detect the elemental distribution of iron ore surface with self-developed soft-ware and 532 nm Nd∶YAG laser.Firstly,in order to illustrate the relationship between element content and spectral intensity, the calibration curve was established by scanning the surface of standard sample.Then,a self-made sample was homogeneously divided into three parts that was pressed by three different standard iron ore powders.For the purpose of validating the mapping technology,a two-dimensional concentration distribution profile was generated after scanning the sample surface which was com-pared with surface morphology phase of the sample.Finally,with the resolution of 100 microns,the surface scanning analysis of the natural iron ore within the scope of 14 mm×11 mm was implemented.With this basis,the distribution profile of the ele-ments Ca,Al,Ti and Mn were obtained,and the analysis results were compared with the surface morphology phase of the natu-ral iron ore.The results showed that LIBS mapping technology could be used to achieve the qualitative analysis of component gradient distribution of the heterogeneous sample surface. |
| |
Keywords: | Laser-induced breakdown spectroscopy Iron ore Mapping Component analysis |
本文献已被 CNKI 万方数据 等数据库收录! |
|