| 二极管泵浦300 W热容固体激光器 |
| |
| 引用本文： | 蔡震,胡浩,蒋建锋,涂波,周唐建,崔铃铃,唐淳,张凯.二极管泵浦300 W热容固体激光器[J].强激光与粒子束,2005,17(Z1):49-52. |
| |
| 作者姓名： | 蔡震 胡浩 蒋建锋 涂波 周唐建 崔铃铃 唐淳 张凯 |
| |
| 作者单位： | 1. 中国工程物理研究院,应用电子学研究所,四川,绵阳,621900;中国工程物理研究院,研究生部,北京,100088
2. 中国工程物理研究院,应用电子学研究所,四川,绵阳,621900 |
| |
| 基金项目： | 国家863计划项目资助课题 |
| |
| 摘 要： | 开展了热容二极管泵浦固体激光器理论和实验研究,针对热容工作模式下工作物质的激光特性进行了初步分析,数值模拟了激光介质增益分布及温度场、应力场分布,初步完成了热容激光器实验平台的建立,在平均泵浦功率1.25 kW的激励条件下获得了大于300 W的激光输出,连续出光时间为5 s,占空比为15%,光-光转换效率约为25%.
|
| 关 键 词： | 激光二极管 热容 温度分布 应力分布 增益分布 |
| 文章编号： | 1001-4322(2005)S0-0049-04 |
| 修稿时间： | 2004年11月22 |
300 W diodes-pumped solid state heat capacity laser |
| |
| CAI Zhen,HU hao,JIANG Jian-feng,Tu Bo,ZHOU Tang-jian,CHUI ling-ling,TANG Chun,ZHANG kai.300 W diodes-pumped solid state heat capacity laser[J].High Power Laser and Particle Beams,2005,17(Z1):49-52. |
| |
| Authors: | CAI Zhen HU hao JIANG Jian-feng Tu Bo ZHOU Tang-jian CHUI ling-ling TANG Chun ZHANG kai |
| |
| Abstract: | The heat-capacity operation of a solid state laser is a novel method by which a high quality beam and high average power can be generated. This paper describes a diodes-pumped solid state heat capacity laser that produces average power of 300 W and a running duration of 5 s. In order to get a uniform gain distribution and acquire a fine thermal distribution to reduce the stress of laser material and to lengthen the time of output, numerical simulation was done to meet the operation conditions of laser . The experiment results show that the output power is up 300 W, the optical-optical efficiency is above 25%. |
| |
| Keywords: | Laser diode Heat capacity Thermal distribution Stress distribution Gain distribution |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
