首页 | 本学科首页   官方微博 | 高级检索  
     检索      

高能工业CT用新型X射线源焦斑测量
引用本文:陈浩,许州,金晓,黎明,单李军,卢和平,杨兴繁,邓仁培,张之福,刘锡三.高能工业CT用新型X射线源焦斑测量[J].强激光与粒子束,2004,16(3):390-394.
作者姓名:陈浩  许州  金晓  黎明  单李军  卢和平  杨兴繁  邓仁培  张之福  刘锡三
作者单位:中国工程物理研究院 应用电子学研究所,四川 绵阳 621900
摘    要: 为了获得较高的空间分辩率,设计了一种新型小束斑驻波电子直线加速器,该加速器取消了加速腔中的鼻锥结构,而在耦合腔中设置鼻锥结构。用狭缝法代替小孔法测得X射线源的焦斑尺寸为1.4mm。讨论了射线源焦点对成像质量的影响,分析了在高能条件下小孔法不适合用于焦点测量的物理原因,用4种测量方法测量了该高能X射线源的参数,测得该系统的成像极限分辩率为2.5 lp/mm,最后对实验结果进行了分析。

关 键 词:加速器  工业CT  X射线  焦斑尺寸  调制传递函数
文章编号:1001-4322(2004)03-0390-05
收稿时间:2003/9/10
修稿时间:2003年9月10日

Spot size measurement of new type X-ray source designed for high energy industrial CT
CHEN Hao,XU Zhou,JIN Xiao,LI Ming,SHAN Li-jun,LU He-ping,YANG Xing-fan,DENG Ren-pei,ZHANG Zhi-fu,LIU Xi-san.Spot size measurement of new type X-ray source designed for high energy industrial CT[J].High Power Laser and Particle Beams,2004,16(3):390-394.
Authors:CHEN Hao  XU Zhou  JIN Xiao  LI Ming  SHAN Li-jun  LU He-ping  YANG Xing-fan  DENG Ren-pei  ZHANG Zhi-fu  LIU Xi-san
Institution:Institute of Applied Electronics, CAEP, P.O. Box 919 1014, Mianyang 621900, China
Abstract:The X-ray source based on electron accelerator is the foundation of high energy industrial CT(ICT). A new type of small spot size SW electron linac was designed with high space resolution. This paper discusses that spot size of radial source influence on the imaging quality, and analyzes the physical reason that at high energy the small hole method wasn't suit for the measurement of spot size, it also gives four kinds of measurement method for this type of high energy X-ray source spot size and the analysis of the experiment results. The measurement results show that spot size of the new type accelerator X-ray source is about 1.4mm, and the limited space resolution is 2.5lp/mm.
Keywords:Accelerator  Industrial CT  X-ray  Spot size  Modulation transfer function(MTF)
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号