首页 | 本学科首页   官方微博 | 高级检索  
     检索      

等压混合引射器设计与实验研究
引用本文:廖达雄,任泽斌,余永生,杨永.等压混合引射器设计与实验研究[J].强激光与粒子束,2006,18(5):728-732.
作者姓名:廖达雄  任泽斌  余永生  杨永
作者单位:1.西北工业大学 航空学院, 西安 710072;2.中国空气动力研究与发展中心, 四川 绵阳 621000
基金项目:国家863计划项目资助课题
摘    要: 采用1维处理方法,建立了便于设计人员使用的等压混合引射器性能计算分析与工程设计方法,并详细分析了等压混合引射器各主要参数对性能的影响。该分析方法基于气体焓的变化,因此可应用于各种引射气体与被引射气体。为了控制尺寸,还首次将多喷嘴引射方式与等压混合结合起来。实验结果验证了等压混合引射器性能计算分析与工程设计方法的可靠性以及多喷嘴引射方式应用于等压混合引射器的可行性。

关 键 词:引射器  压力恢复系统  设计  实验
文章编号:1001-4322(2006)05-0728-05
收稿时间:2003-04-19
修稿时间:2006-05-09

Design and experiment of constant-pressure mixing ejector
LIAO Da-xiong,REN Ze-bin,YU Yong-sheng,YANG Yong.Design and experiment of constant-pressure mixing ejector[J].High Power Laser and Particle Beams,2006,18(5):728-732.
Authors:LIAO Da-xiong  REN Ze-bin  YU Yong-sheng  YANG Yong
Institution:1. School of Aeronautics, Northwest Polytechnic University, Xi''an 710072, China;2. China Aerodynamics Research and Development Center,Mianyang 621000,China
Abstract:A simple engineering method is developed to design and predict the performance of the constant-mixing ejector.The influence of ejector parameters on performance is also analyzed.Since the method is formulated in terms of enthalpy,it is applicable to all kinds of primary and secondary gases.In order to control ejector size,the multi-nozzle type and the constant-mixing ejector are integrated.For purpose of verification,the method is compared with experiment results.
Keywords:Ejector  Design  Experiment  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号