首页 | 本学科首页   官方微博 | 高级检索  
     检索      

同轴电缆测量纳秒脉冲信号衰减的数字补偿
引用本文:付佳斌,卿燕玲,卫兵,杨礼兵,丰树平.同轴电缆测量纳秒脉冲信号衰减的数字补偿[J].强激光与粒子束,2011,23(10).
作者姓名:付佳斌  卿燕玲  卫兵  杨礼兵  丰树平
作者单位:中国工程物理研究院 流体物理研究所, 四川 绵阳 621900
基金项目:国家自然科学基金项目(10635050)
摘    要: 为了减小较长的信号传输电缆对纳秒量级前沿测量信号波形的畸变,提出了一种同轴电缆信号衰减数字补偿的方法。该方法利用信号在电缆中传输的衰减特性,结合标定或者扫频所得频响进行拟合,得到电缆的频响特性函数,再对电缆的出口信号进行反补,可以重建入口信号。经过实验验证,此补偿方法可以明显改善信号传输系统的频响特性,对于实验中的100 m的SYV-50-7-2同轴电缆,补偿前传输带宽-3dB约在40 MHz处,补偿后传输带宽约为1 GHz。

关 键 词:纳秒脉冲  同轴电缆  信号衰减  数字补偿  傅里叶变换  频响特性
收稿时间:1900-01-01;

Numerical compensation for coaxial cable signal degradation
Fu Jiabin,Qing Yanling,Wei Bing,Yang Libing,Feng Shuping.Numerical compensation for coaxial cable signal degradation[J].High Power Laser and Particle Beams,2011,23(10).
Authors:Fu Jiabin  Qing Yanling  Wei Bing  Yang Libing  Feng Shuping
Institution:(Institute of Fluid Physics, CAEP, P.O.Box 919-108, Mianyang 621900, China)
Abstract:A numerical compensation method is proposed to reduce nanosecond signal distortion caused by tens meters of cable.The method calibrates the target cable with a relatively short cable,performs Fourier transform on the output signals of the two cables,and then gets the original function of the long cable sensitivity and phase with frequency,by using the frequency characteristics of the signals.For this original function is full of noise,it needs to be the fitted with system model.And then the cable's output s...
Keywords:nanosecond pulse  coaxial cable  signal degrdation  numerical compensation  Fourier transform  frequency characteristics  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号