首页 | 本学科首页   官方微博 | 高级检索  
     检索      

激光辐照环境对金属材料反射特性的影响
引用本文:张永强,王贵兵,李维,陶彦辉.激光辐照环境对金属材料反射特性的影响[J].强激光与粒子束,2011,23(8).
作者姓名:张永强  王贵兵  李维  陶彦辉
作者单位:1. 中国工程物理研究院 流体物理研究所, 四川 绵阳 621900; 2. 海装驻重庆地区军事代表局, 重庆 400042
摘    要: 利用积分球绝对测量法,对在20 Pa真空缺氧、1 000 Pa空气,105 Pa空气及1 000 Pa氧气环境下,1 064 nm波长连续激光辐照30CrMnSiA碳钢材料过程中的反射光信号进行了测量,得到了30CrMnSiA碳钢在4种辐照环境下的反射率和温度变化曲线。结果表明:在空气组分辐照环境的低压到105 Pa范围内,材料初始反射率随压力增大而增大;在缺氧和富氧环境的激光辐照过程中,缺氧环境下材料反射率变化缓慢,且变化拐点温度高于富氧环境,富氧环境下材料被加热后的快速氧化反应有利于材料对激光能量的吸收;不同辐照环境(缺氧和富氧)相同材料温度条件下,材料反射率并不相同。

关 键 词:激光  金属材料  反射率  辐照环境  压力
收稿时间:1900-01-01;

Effect of laser irradiation environments on metal material reflection characteristic
Zhang Yongqiang,Wang Guibing,Li Wei,Tao Yanhui.Effect of laser irradiation environments on metal material reflection characteristic[J].High Power Laser and Particle Beams,2011,23(8).
Authors:Zhang Yongqiang  Wang Guibing  Li Wei  Tao Yanhui
Institution:(1. Institute of Fluid Physics, CAEP, P.O. Box 919-113, Mianyang 621900, China; 2. Military Representative Bureau of Navy Equipment Department in Chongqing Area, Chongqing 400042, China)
Abstract:The reflectance of 30CrMnSiA carbon steel under laser irradiation in 20 Pa air,1 000 Pa air,1 000 Pa oxygen gas and 105 Pa air was obtained by integrating sphere absolute measurement method,and corresponding temperature history curves were got.The results show that the initial reflectance of material in air increases with the pressure varying from 20 Pa to 105 Pa.The change of reflectance is slower and the inflexion temperature of reflectance change is higher in oxygen-deficient environment than those in ox...
Keywords:laser  metal  reflectance  irradiation environment  pressure  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号