| ICF物理实验用纳米Cu块体靶材的制备研究 |
| |
| 引用本文： | 楚广,唐永建,罗江山,刘伟,杨天足,黎军,洪伟.ICF物理实验用纳米Cu块体靶材的制备研究[J].强激光与粒子束,2005,17(12):1829-1834. |
| |
| 作者姓名： | 楚广 唐永建 罗江山 刘伟 杨天足 黎军 洪伟 |
| |
| 作者单位： | 1. 中南大学 冶金科学与工程学院， 湖南 长沙 410083；2. 中国工程物理研究院 激光聚变研究中心， 四川 绵阳 621900；3. 西南科技大学 材料科学与工程学院， 四川 绵阳 621010 |
| |
| 基金项目： | 国家自然科学基金资助课题（10475069/A0506）;中国工程物理研究院科学基金资助（20050866）.致谢 感谢中国工程物理研究院激光聚变研究中心靶科学与制备部全体同事和领导的支持,感谢雷海乐、师红丽的支持和帮助,特别感谢中国工程物理研究院化工材料研究所第3部的支持和帮助. |
| |
| 摘 要： | 采用自悬浮定向流法制备了金属纳米粉体并采用真空手套箱专利技术和冷压法在高压（1.5 GPa）作用下保压40 min后，成功制备出了相对密度达97％和显微硬度达1.85 GPa的金属Cu纳米晶材料。经XRD分析，其晶粒大小为20 nm。正电子湮没(PAS)实验结果表明，其空隙大小和数量与采用惰性气体冷凝法原位压制(IGC)的样品相比，空位簇数量较多，微空隙的大小和数量基本相当。激光惯性约束聚变（ICF）模拟实验表明：采用该方法制备的纳米Cu块体材料靶的激光转换效率比常规Cu材料靶高5倍。
|
| 关 键 词： | 金属纳米晶体 纳米Cu块体 惯性约束聚变靶材料 自悬浮定向流法 显微硬度 |
| 文章编号： | 1001-4322(2005)12-1829-06 |
| 收稿时间： | 2005-06-06 |
| 修稿时间： | 2005-08-26 |
Preparation synthesis of nanocrystalline copper target material for ICF experiments |
| |
| CHU Guang,TANG Yong-jian,LUO Jiang-shan,LIU Wei,YANG Tian-zu,LI Jun,HONG Wei.Preparation synthesis of nanocrystalline copper target material for ICF experiments[J].High Power Laser and Particle Beams,2005,17(12):1829-1834. |
| |
| Authors: | CHU Guang TANG Yong-jian LUO Jiang-shan LIU Wei YANG Tian-zu LI Jun HONG Wei |
| |
| Institution: | 1.College of Metallurgical Science and Engineering, Central South University, Changsha 410083, China;2. Research Center of Laser Fusion, CAEP, P.O.Box 919-987, Mianyang 621900, China;3. Institute of Material Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, China |
| |
| Abstract: | Copper nano-particles were prepared by flow-levitation method and compacted for 40 min under pressure of 1.5 GPa by cold pressing method.The pressing process was studied well under 25 ℃ and inert gas protection.The relative density and the microhardess of a specimen were 97% and 1.85 GPa,respectivity.XRD analysis showed that the average grain size of the specimens was 20 nm.The positron annihilation spectroscopy(PAS) results showed that the size and amount of the vacancies and microvoids were similar to those of the nanocrystalline Cu prepaered by inert gas condensation method(IGC) but more large voids.The simulation experiment of inertial confinement fusion indicated that the efficiency of K_α-ray conversed from laser with nanocrystalline Cu was 5 times higher than that of coarse-grained Cu. |
| |
| Keywords: | Nanocrystalline metals Nanocrystalline Cu Inertial confinement fusion target material Flow-levitation method Microhardness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
