首页 | 本学科首页   官方微博 | 高级检索  
     检索      

封装结构强电磁脉冲多物理效应并行计算程序研制
引用本文:赵振国,李光荣,童杰,徐刚,周海京.封装结构强电磁脉冲多物理效应并行计算程序研制[J].强激光与粒子束,2018,30(8):083001-1-083001-5.
作者姓名:赵振国  李光荣  童杰  徐刚  周海京
作者单位:1.中物院高性能数值模拟软件中心, 北京 100088
基金项目:国家自然科学基金项目11675022国家自然科学基金项目6143104科学挑战专题资助项目TZ2018002;中物院复杂电磁环境重点实验室基金项目FZ2018-001
摘    要:介绍了自主研发的强电磁脉冲多物理效应并行计算程序JEMS-CDS-System的情况,该程序采用时域有限元方法,基于JAUMIN并行自适应结构网格支撑框架研制,并行效能高,可扩展性强,且支持动态负载平衡。通过算例测试表明,该程序对于键合线的电-热-应力失效过程的最高温度与范式等效应力计算结果与COMSOL软件计算结果吻合较好;SiP功率放大模块的热-应力耦合天河2高性能计算平台并行计算结果表明,该程序在CPU1024核时,具有38.1%并行效率。

关 键 词:电磁脉冲效应    多物理效应    并行计算    系统级封装
收稿时间:2017-11-02

Development of massively parallel simulation software applied to multi-physics effect with electromagnetic pluses excitation
Institution:1.Software Center for High Performance Numerical Simulation of CAPE, Beijing 100088, China2.Institute of Applied Physics and Computational Mathematics, Beijing 100094, China3.Institute of Electronics Engineering, CAEP, Mianyang 621900, China4.Center for Optics and EM Research, Zhejiang University, Hangzhou 310058, China
Abstract:This paper presents the study of massively parallel simulation of multi-physics effect with electromagnetic pluses excitation using a high-performance computing scheme based on JAUMIN. Our in-house time-domain finite element parallel program JEMS-CDS-System is employed for simulating the electro-thermo-mechanical responses of bonding wire arrays and their highest temperatures and von Mises stress are captured and validated in comparison with those of the commercial simulator COMSOL. The thermo-mechanical responses of a part of SiP are simulated and parallel efficiency of our parallel program is assessed by the experiment of its strong parallel scalability. Our parallel program can reach a speedup of 6.095 and strong scalability efficiency of 38.1% on 1024 CPU cores.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号