| HEPS-TF超导3W1扭摆磁铁控制系统的设计 |
| |
| 引用本文： | 杨敏,战明川,雷革,余玉兰.HEPS-TF超导3W1扭摆磁铁控制系统的设计[J].强激光与粒子束,2018,30(8):085107-1-085107-5. |
| |
| 作者姓名： | 杨敏 战明川 雷革 余玉兰 |
| |
| 作者单位： | 1.中国科学院 高能物理研究所, 北京 100049 |
| |
| 基金项目： | 国家重大科技基础设施建设项目 |
| |
| 摘 要： | 介绍了中国高能同步辐射光源验证装置(HEPS-TF)中超导3W1扭摆磁铁控制系统的设计。该控制系统主要包括电源控制系统和低温信号监测系统。整个控制系统基于实验物理及工业控制系统(EPICS)，其硬件结构以串口服务器为核心，将接口转换为标准的RS232/485接口。软件方面，通过应用StreamDevice设备驱动模块开发了基于Modbus协议的EPICS驱动，缩短了设备驱动的开发周期。上层控制界面采用嵌入了EPICS Qt框架的Qt Creator开发，增强了其灵活性。目前控制系统的离线测试已完成。
|
| 关 键 词： | 中国高能同步辐射光源验证装置 电源控制系统 低温信号监测系统 实验物理及工业控制系统 |
| 收稿时间： | 2017-09-05 |
Design of superconducting 3W1 wiggler control system in Chinese High Energy Photon Source-Test Facility |
| |
| Institution: | 1.Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China2.University of Chinese Academy of Sciences, Beijing 100049, China |
| |
| Abstract: | This paper describes the design of a control system for 3 W1 wiggler in the Chinese High Energy Photon SourceTest Facility (HEPS-TF).The control system includes the superconducting power supply control system and the cryogenic monitor system.It is based on the Experimental Physics and Industrial Control System (EPICS) and the hardware core of the control system is a serial port server which normalizes the port to the standard RS232/485 serial port.StreamDevice has been used to develop the EPICS driver whose protocol is based on Modbus.High level applications are developed by Qt Creator embedded with EPICS Qt framework.At present, the control system has been basically completed and tested off-line. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
