首页 | 本学科首页   官方微博 | 高级检索  
     检索      

面向XFEL的km级光纤链路的fs精度时钟分布
引用本文:马春阳,宋有建,刘新宇,李晶,刘友永,胡明列,王清月.面向XFEL的km级光纤链路的fs精度时钟分布[J].强激光与粒子束,2016,28(5):055102.
作者姓名:马春阳  宋有建  刘新宇  李晶  刘友永  胡明列  王清月
作者单位:1.天津大学 精密仪器与光电子工程学院, 光电信息技术科学教育部重点实验室, 天津 300072;
摘    要:报道了一种基于光纤链路的飞秒精度的时钟分布方案。一台被动锁模的光纤飞秒激光器输出的超短脉冲序列作为主时序,通过2 km的普通单模光纤链路分发,利用平衡光学互相关技术探测传输中积累的时钟延迟误差,由光纤拉伸器和步进电机相结合在本地主动补偿,在2 h内的时钟分布稳定度优于10-18,时钟延迟标准差为1.1 fs。

关 键 词:飞秒激光    时钟同步    X射线自由电子激光器    平衡光学互相关    光纤链路
收稿时间:2015-11-02

Femtosecond precision timing distribution over km level stabilized fiber link for application in XFEL
Institution:1.Key Laboratory of Opto-electronic Information Science and Technology of Ministry of Education,School of Precision Instruments and Opto-electronics Engineering,Tianjin University,Tianjin 300072,China;2.Remote Control and Telemetry Division,The 54th Research Institute of China Electronics Technology Group Corporation,Shijiazhuang 050081,China
Abstract:This paper demonstrates a fiber link based timing distribution with femtosecond precision. The output femtosecond laser pulse train from a passively mode-locked fiber laser serves as master clock, which is distributed over a 2 km single mode fiber link. A balanced optical cross-correlator (BOC) is used to monitor the accumulated timing error, which is actively compensated by a local fiber stretcher and a step motor. The standard deviation of the residual timing error is less than 1.1 fs over 2 h observation, and the time stability is better than 10-18.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号