首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于蒙特卡罗的小尺度参考辐射装置屏蔽研究
引用本文:徐阳,魏彪,毛本将,刘易鑫,冯鹏.基于蒙特卡罗的小尺度参考辐射装置屏蔽研究[J].强激光与粒子束,2016,28(9):096004.
作者姓名:徐阳  魏彪  毛本将  刘易鑫  冯鹏
作者单位:1.重庆大学 光电工程学院, 重庆400044;
摘    要:针对移动式小尺度参考辐射(MRR)装置(移动式校准装置),在进行射线辐射剂量测量的仪器仪表标定或刻度时,应满足其辐射屏蔽安全限值5 Sv/h的屏蔽技术要求,采用蒙特卡罗输运程序MCNP,开展了移动式小尺度参考辐射装置表面剂量场屏蔽的模拟计算和研究分析工作。研究结果表明,通过MCNP模拟的屏蔽设计方法可以详尽反映MRR装置各个表面的剂量分布特征和规律,实现移动式小尺度参考辐射装置屏蔽设计,采用的铅钢材料复合屏蔽方案能够保证装置硬度且显著地减轻屏蔽体的重量,最终获取的优化MRR屏蔽箱体重量约为271.9 kg。

关 键 词:移动式校准装置    参考辐射    蒙特卡罗程序    屏蔽设计
收稿时间:2016-01-09

Shielding research of minitype reference radiation device based on Monte Carlo simulation
Institution:1.Faculty of Optical Engineering,Chongqing University,Chongqing 400044,China;2.Institute of Nuclear Physics and Chemistry,CAEP,Mianyang 621900,China
Abstract:When applied the minitype reference radiation (MRR) to calibrate gamma ray dosimeters, the shielding structure of the MRR should meet the shielding technique demand, in which the limit dose rate of the outside surface of the MRR must be lower than 5 Sv/h. In order to optimize the shielding design of the MRR, Monte Carlo particle transport code MCNP is employed to simulate and analyze the dose distribution of the outside surface of the MRR. The results show that the dose distribution of each surface of the MRR can be described in detail with MCNP and it is conducive to complete shielding design. The lead-steel composite material is applied to increase the strength and reduce the weight of the MRR. The optimized weight of the MRR is about 271.9 kg.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号