矩形高速流场的材料去除特性 |
| |
引用本文: | 芈绍桂,罗银川,李风雨,张蓉竹,杨李茗.矩形高速流场的材料去除特性[J].强激光与粒子束,2016,28(7):071006. |
| |
作者姓名: | 芈绍桂 罗银川 李风雨 张蓉竹 杨李茗 |
| |
作者单位: | 1.中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621 900; |
| |
摘 要: | 为了提高射流抛光的加工效率,设计了一种矩形喷嘴结构,基于并行去除方式来提高工件的去除效率。根据流体力学基本理论,分析了矩形喷嘴冲击射流流场的结构特性,并对其流场分布进行了定量计算。基于射流去除理论,建立了矩形喷嘴的材料去除理论模型,并对去除量分布进行了计算与比较。详细分析了矩形喷嘴结构参数与去除量之间的关系,在此基础上对矩形喷嘴进行了优化,结果表明,矩形喷嘴长宽比控制在10左右能够得到很好的去除效果。
|
关 键 词: | 射流 矩形喷嘴 高速流场 长宽比 去除率 |
收稿时间: | 2015-12-16 |
Material removal characteristics analysis of rectangular high-speed flow field in fluid jet polishing |
| |
Institution: | 1.Research Center of Laser Fusion,CAEP,P.O.Box 919-988,Mianyang 621900,China;2.Electronics and Information Engineering,Sichuan University,Chengdu 610064,China |
| |
Abstract: | In order to improve the efficiency of fluid jet polishing (FJP), the rectangle-nozzle structure was proposed to improve the removal efficiency in parallel. According to principles of fluid dynamics, the flow field characteristic of rectangle-nozzle structure was analyzed theoretically and the flow field distribution was calculated. Based on jet removal theory, the theoretical material removal models of rectangle-nozzle model were established, and removal distributions were calculated and compared. The relationship between rectangle-nozzle structure parameters and removal was analyzed in detail. Based on above results, the rectangle-nozzle was optimized. The results show that when the rectangle-nozzle length-width ratio be controlled to 10 or so can obtain better removal effect. |
| |
Keywords: | |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|