高功率光纤端帽实现6kW激光输出 |
| |
引用本文: | 周旋风,陈子伦,侯静,王泽锋,许晓军.高功率光纤端帽实现6kW激光输出[J].强激光与粒子束,2015,27(12):120101. |
| |
作者姓名: | 周旋风 陈子伦 侯静 王泽锋 许晓军 |
| |
作者单位: | 1.国防科学技术大学 光电科学与工程学院, 长沙 41 0073 |
| |
摘 要: | 高功率光纤端帽是kW级光纤激光器必不可少的器件,而实现光纤端帽的低损耗高强度熔接是其关键技术。由于光纤和大尺寸光纤端帽在直径上的巨大差异,二者的熔接不能通过传统熔接机实现。设计并搭建了光纤端帽熔接系统,掌握了多种尺寸的光纤端帽的熔接工艺,成功用于光纤激光器及光纤合束器的高功率输出。实验上利用单模光端帽实现了3.01kW的激光输出,在未进行主动制冷的情况下温升为7℃/kW。利用多模光纤端帽实现了6.08kW的激光输出,在未进行主动制冷的情况下温升为6℃/kW。
|
关 键 词: | 光纤激光器 光纤熔接 光纤端帽 |
收稿时间: | 2015-10-20 |
High power fiber end-cap with 6 kW output power |
| |
Institution: | 1.College of Optoelectronic Science and Engineering,National University of Defense Technology,Changsha 410073,China |
| |
Abstract: | High power fiber end-cap is an essential component for kW-level fiber lasers, the key technique of which is the splicing of fiber end-caps with low loss and high tension strength. Due to the huge difference of the diameters of fiber and large-size end-cap, the splicing of them cannot be realized by traditional fusion splicers. A fiber end-cap splicing system is designed and built. The splicing art is implemented for different size end-caps with good tension strength. Output power with 3.01 kW is realized with a single-mode fiber end-cap while only heating up by 7 ℃/kW without active cooling. Output power with 6.08 kW is realized with a multi-mode fiber end-cap while only heating up by 6 ℃/kW without active cooling. |
| |
Keywords: | |
本文献已被 CNKI 万方数据 等数据库收录! |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|