| 激光辐照InSb（PV）型探测器的温升计算 |
| |
| 引用本文： | 蒋志平,陆启生.激光辐照InSb（PV）型探测器的温升计算[J].强激光与粒子束,1990,2(2):247-251. |
| |
| 作者姓名： | 蒋志平 陆启生 |
| |
| 作者单位： | 国防科技大学应用物理系
(蒋志平，陆启生)，国防科技大学应用物理系(刘泽金) |
| |
| 摘 要： | 用一维热传导模型计算得出了激光辐照下InSb(PV)型探测器p-n结处的温升变化。计算和讨论了胶层的热传导率、厚度对激光破坏阈值及热恢复时间的影响。指出选用大热导率的胶并使胶层尽可能薄是提高探测器抗激光性能的有效方法。
|
| 关 键 词： | 激光 辐照 光电 探测器 温升 |
CALCULATION OF TEMPERATURE RAISE InSb (PV) DETECTOR ILLUMINATED BY LASER BEAM |
| |
| Jiang Zhiping,Lu Qisheng,Liu Zejing National University of Defense Technology,Dept,of Appl,Phys.CALCULATION OF TEMPERATURE RAISE InSb (PV) DETECTOR ILLUMINATED BY LASER BEAM[J].High Power Laser and Particle Beams,1990,2(2):247-251. |
| |
| Authors: | Jiang Zhiping Lu Qisheng Liu Zejing National University of Defense Technology Dept of Appl Phys |
| |
| Abstract: | The Temperature Raise of the p-n joint in InSb (PV) Detector is obtained using a 1 -D model of heat conduction .The effects of heat conductivity and thickness of glue on laser damage threshold and heat recovery time are calculated and discussed . It is pointed out that using the glue of high heat conductivity and making the thickness of the glue as thin as possible are effective for improving the protection of the detector . |
| |
| Keywords: | temperature raise laser damage threshold heat recovery time |
| 本文献已被 CNKI 维普 等数据库收录！ |
