首页 | 本学科首页   官方微博 | 高级检索  
     检索      

开关触发延迟时间和抖动测量的不确定度分析
引用本文:卫兵,卿燕玲,李洪涛,王玉娟,傅贞,何安,丰树平.开关触发延迟时间和抖动测量的不确定度分析[J].强激光与粒子束,2010,22(7).
作者姓名:卫兵  卿燕玲  李洪涛  王玉娟  傅贞  何安  丰树平
作者单位:中国工程物理研究院 流体物理研究所, 四川 绵阳 621900
基金项目:国防科技基础研究基金 
摘    要:为明确脉冲功率装置开关触发延迟时间和抖动测量的可信度,进行了不确定度评定。使用拟合的线性关系式结合示波器水平分辨力导致的不确定度建立开关延迟时间不确定度的数学模型;根据抖动的定义建立抖动的测量不确定度数学模型。两者均按B类不确定度评定。以相关实验数据为基础计算了各个不确定度分量、合成标准不确定度以及扩展不确定度。按工程测量要求置信概率为95%,取包含因子为2,可得初级实验平台(PTS)单路样机激光触发开关触发延迟时间测量的扩展不确定度为0.38 ns;抖动测量的扩展不确定度为0.13 ns。延迟时间和抖动测量结果的不确定度满足实验分析的要求。

关 键 词:激光触发开关  延迟时间  抖动  测量不确定度
收稿时间:1900-01-01;

Uncertainty in delay and jitter measurement of laser-triggered switch
Wei Bing,Qing Yanling,Li Hongtao,Wang Yujuan,Fu Zhen,He An,Feng Shuping.Uncertainty in delay and jitter measurement of laser-triggered switch[J].High Power Laser and Particle Beams,2010,22(7).
Authors:Wei Bing  Qing Yanling  Li Hongtao  Wang Yujuan  Fu Zhen  He An  Feng Shuping
Institution:Institute of Fluid Physics, CAEP, P. O. Box 919-108, Mianyang 621900, China
Abstract:The uncertainty in delay and jitter measurement has been evaluated for the laser-triggered switch in the Z-pinch primary test stand (PTS) prototype module. The delay is defined as the time difference between the 10% amplitude points in rise edges of laser signal and dI/dt of the switch. A line can be fitted from the rise edge of the dI/dt waveform, whose slope determines the influence of amplitude measurement’s uncertainty on delay measurement's uncertainty. Thus the frequency response uncertainty of the measure system is included in the linear function, and the math model of delay uncertainty is founded from the linear function modified with the uncertainty from the time resolution of the digital oscillograph. The model of jitter uncertainty is founded from the definition of jitter, and
Keywords:delay  jitter  measurement uncertainty
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号