首页 | 本学科首页   官方微博 | 高级检索  
     检索      

一种带有弹簧的丝型同步光位置检测器
引用本文:林顺富,孙葆根,高辉,卢平,申超波,鲍循.一种带有弹簧的丝型同步光位置检测器[J].强激光与粒子束,2007,19(8):1369-1372.
作者姓名:林顺富  孙葆根  高辉  卢平  申超波  鲍循
作者单位:中国科学技术大学 国家同步辐射实验室, 合肥 230029
基金项目:国家自然科学基金;中国科学院基金
摘    要: 介绍了合肥光源机器诊断光束线上具有弹簧系统的丝型光位置检测器,经过标定该检测器的线性范围大于4 mm,灵敏度约为0.197 9 mm-1。通过不同束流流强下同步光垂直尺寸的测量,发现束流流强对同步光垂直尺寸的影响不大,不需要对灵敏度进行修正。进行了无氧铜板施加正偏压的测量,在施加正偏压时能够提高线性范围和略改善信噪比。

关 键 词:同步光位置  丝型光位置检测器  差比和处理技术  对数比处理技术  机器诊断光束线
文章编号:1001-4322(2007)08-1369-04
收稿时间:2007/2/25
修稿时间:2007-02-25

Photon beam position monitor with spring system in HLS
LIN Shun-fu,SUN Bao-gen,GAO Hui,LU Ping,SHEN Chao-bo,BAO Xun.Photon beam position monitor with spring system in HLS[J].High Power Laser and Particle Beams,2007,19(8):1369-1372.
Authors:LIN Shun-fu  SUN Bao-gen  GAO Hui  LU Ping  SHEN Chao-bo  BAO Xun
Institution:National Synchrotron Radiation Laboratory, University of Science and Technology of China, P.O.Box 6022, Hefei 230029, China
Abstract:A new wire photon beam position monitor with a spring system was designed and installed in the machine diagnostic beamline in Hefei Light Source(HLS).The linearity range is 4 mm,and the sensitivity is about 0.197 9 mm-1.The beam current has a little effect on the synchrotron radiation vertical size.The signal-to-noise ratio and the linearity can be improved,but the sensitivity decreases with a positive bias voltage applied to the copper block.
Keywords:Photon beam position monitor  Wire monitor  Difference over sum method  Logarithmic ratio method  Machine diagnostic beamline
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号