Fabrication and optical properties of InGaN/GaN multiple quantum well light emitting diodes with amorphous BaTiO₃ ferroelectric film

BaTiO3(BTO) ferroelectric thin films are prepared by the sol-gel method.The fabrication and the optical properties of an InGaN/GaN multiple quantum well light emitting diode(LED) with amorphous BTO ferroelectric thin film are studied.The photoluminescence(PL) of the BTO ferroelectric film is attributed to the structure.The ferroelectric film which annealed at 673 K for 8 h has the better PL property.The peak width is about 30 nm from 580 nm to 610 nm,towards the yellow region.The mixed electroluminescence(EL) spectrum of InGaN/GaN multiple quantum well LED with 150-nm thick amorphous BTO ferroelectric thin film displays the blue-white light.The Commission Internationale De L’Eclairage(CIE) coordinate of EL is(0.2139,0.1627).EL wavelength and intensity depends on the composition,microstructure and thickness of the ferroelectric thin film.The transmittance of amorphous BTO thin film is about 93% at a wavelength of 450 nm-470 nm.This means the amorphous ferroelectric thin films can output more blue-ray and emission lights.In addition,the amorphous ferroelectric thin films can be directly fabricated without a binder and used at higher temperatures(200℃-400℃).It is very favourable to simplify the preparation process and reduce the heat dissipation requirements of an LED.This provides a new way to study LEDs.