| 二级电炮加载技术研究 |
| |
| 引用本文： | 罗斌强,赵剑衡,孙承纬,莫建军,贺佳,张兴卫,王桂吉,谭福利.二级电炮加载技术研究[J].高压物理学报,2012,26(3):251-258. |
| |
| 作者姓名： | 罗斌强 赵剑衡 孙承纬 莫建军 贺佳 张兴卫 王桂吉 谭福利 |
| |
| 作者单位： | 中国科学技术大学,中国科学院材料力学行为和设计重点实验室;中国工程物理研究院流体物理研究所 |
| |
| 基金项目： | 国家自然科学基金重点项目(10732010),国家自然科学基金仪器专项(10927201);中国工程物理研究院重点基金(2010A0201006) |
| |
| 摘 要： | 利用常规电炮发射金属飞片的实验技术，将Φ10 mm×0.5 mm、Φ10 mm×0.3 mm铝飞片分别发射到300、500 m/s的速度且具有较好的平面度，有效拓展了电炮在相对较低的飞片发射速度和较低应变率下的加载能力（飞片速度约100 m/s、应变率小于106 s-1），使之可以在更宽的应变率和加载压力下使用。利用二级电炮技术，对Zr51Ti5Ni10Cu25Al9块体非晶合金进行了平面撞击实验，获得了较好的结果，该工作对电炮加载技术的推广应用有着重要的作用。
|
| 关 键 词： | 电炮 金属飞片 加载技术 |
Experimental Technique of Two-Stage Electric Gun |
| |
| LUO Bin-Qiang,ZHAO Jian-Heng,SUN Cheng-Wei,MO Jian-Jun,HE Jia,ZHANG Xing-Wei,WANG Gui-Ji,TAN Fu-Li.Experimental Technique of Two-Stage Electric Gun[J].Chinese Journal of High Pressure Physics,2012,26(3):251-258. |
| |
| Authors: | LUO Bin-Qiang ZHAO Jian-Heng SUN Cheng-Wei MO Jian-Jun HE Jia ZHANG Xing-Wei WANG Gui-Ji TAN Fu-Li |
| |
| Institution: | 1.Key Laboratory of Mechanical Behavior and Design of Materials,University of Science and Technology of China,Hefei 230027,China; 2.Institute of Fluid Physics,CAEP,Mianyang 621900,China) |
| |
| Abstract: | A newly designed configuration based on an electric gun(namely two-stage electric gun) was used to launch metallic flyer,and dimension of ■10 mm×0.5 mm,■10 mm×0.3 mm aluminum flyers can be accelerated to 300 m/s and 500 m/s,respectively.Using the two-stage electric gun,dynamic response of Zr-based amorphous alloy was investigated under planar impact and good results were obtained.This work extended the capability of electric gun to contain wider range of planer flyer velocity(0.1-10 km/s) and loading strain rates(105-106 s-1),and it may be helpful to planer-impact experiments. |
| |
| Keywords: | electric gun metallic flyer experimental technique |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《高压物理学报》浏览原始摘要信息 |
| 点击此处可从《高压物理学报》下载免费的PDF全文 |
|
