首页 | 本学科首页   官方微博 | 高级检索  
     检索      

用按需滴定技术制备聚合物微透镜阵列
引用本文:张玉虹,康利军,胡宝文,王丽莉,李同海,李育林.用按需滴定技术制备聚合物微透镜阵列[J].光子学报,2005,34(11):1639-1642.
作者姓名:张玉虹  康利军  胡宝文  王丽莉  李同海  李育林
作者单位:中国科学院西安光学精密机械研究所,西安,710068
基金项目:国家自然科学重点基金(60337030)资助项目.
摘    要:采用高分子聚合物-单体混合溶液按需滴定-原位热聚合的新方法制作折射微透镜及其阵列.制备透镜的主要材料是甲基丙烯酸甲酯及其聚合物.制备的微透镜直径在1 mm~3 mm范围内,矢高为100 μm~400 μm,透镜焦距在1 mm~4 mm之间.所得微透镜在波长λ=1.55 μm处有很好的光学透过率(90%),适于作光通信耦合器件.用AFM-Ⅱ型原子力显微镜测得微透镜阵列的表面粗糙度Ra约等于0.9 nm,并通过液体的表面张力理论分析了微透镜的形成机理.

关 键 词:按需滴定-原位热聚合  聚合物微透镜阵列  表面粗糙度  聚甲基丙烯酸甲酯
收稿时间:2004-09-13
修稿时间:2004年9月13日

Preparation of Polymer Microlenses Array by using Drop-on-Demand Technology
Zhang Yuhong,Kang Lijun,Hu Baowen,Wang Lili,Li Tonghai,Li Yulin.Preparation of Polymer Microlenses Array by using Drop-on-Demand Technology[J].Acta Photonica Sinica,2005,34(11):1639-1642.
Authors:Zhang Yuhong  Kang Lijun  Hu Baowen  Wang Lili  Li Tonghai  Li Yulin
Institution:Xi′an Institute of Optics and Precision Mechanics of CAS,Xi′an 710068
Abstract:High-quality refractive microlens and microlens array have been fabricated using drop-on-demand and in-situ thermal polymerization technology with polymer PMMA and its monomer MMA.Microlenses diameters and heights range from d=1 mm to 3 mm,and h=100 μm to 400 μm,respectively.A focal length ranges from 1mm to 4 mm approximately.All the components have high optical transparency(90%)at the wavelength of 1.55 μm to be suitable for optical communication coupled devices.The surface roughness of microlens is measured by an atomic force microscope(AFM-Ⅱ).Micro-lens forming mechanics has been analyzed by surface tension theory.
Keywords:Drop-on-Demand and in-situ thermal polymerization  Polymer microlenses arrays  Surface roughness  PMMA
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《光子学报》浏览原始摘要信息
点击此处可从《光子学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号