首页 | 本学科首页   官方微博 | 高级检索  
     检索      

M MI功分器结构参量的优化设计
引用本文:黄耐容,王谦,何赛灵.M MI功分器结构参量的优化设计[J].光子学报,2003,32(1):81-85.
作者姓名:黄耐容  王谦  何赛灵
作者单位:1. 浙江大学物理系,杭州,310027;浙江大学现代光学仪器国家重点实验室光及电磁波研究中心,杭州,310027
2. 浙江大学现代光学仪器国家重点实验室光及电磁波研究中心,杭州,310027
摘    要:基于精确模式传输分析方法(MPA),提出等效宽度的概念,在此基础上重新修正了自成像理论中有关多模干涉(MMI)功分器的输入(出)波导位置和干涉区长度.并且以1×4,4×4耦合器为例,对各个结构参量进行扫描,证明修正后的耦合器结构使耦合器分光均匀性提高,附加损耗减小,具有实际应用价值.

关 键 词:耦合器  功分器  多模干涉
收稿时间:2001/11/5
修稿时间:2001年11月5日

Optimized Parameters of MMI Splitter's Structure
Huang Nairong ,Wang Qian,He Sailing Physics.Optimized Parameters of MMI Splitter''''s Structure[J].Acta Photonica Sinica,2003,32(1):81-85.
Authors:Huang Nairong    Wang Qian  He Sailing Physics
Institution:Huang Nairong 1,2,Wang Qian2,He Sailing2 1 Physics Department,Zhejiang University,Hangzhou 310027,P.R.China 2 State Key Laboratory for Modern Optical Instrumentation,Center for Optical and Electromagnetic Research,Zhejiang University,Hangzhou 310027,P.R.China Received date: 20011105
Abstract:Proposed the conception of effective width based exact modal propagation analysis (MPA) and modified position of input (output) wave-guides and length of multi-mode interference region. Scaned all kinds of structure parameters of 1×4、4×4 MMI coupler to testify the modified parameters is optimization. The new designed 1×4、4×4 MMI coupler had good uniformity and insertion loss.
Keywords:Coupler  Splitter  Multimode interference
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《光子学报》浏览原始摘要信息
点击此处可从《光子学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号