| 平响应X射线光阴极的理论设计与计算模拟 |
| |
| 引用本文： | 王传珂,李晋,杨鸣,王保清,李廷帅,易涛,刘慎业.平响应X射线光阴极的理论设计与计算模拟[J].光子学报,2017,46(5). |
| |
| 作者姓名： | 王传珂 李晋 杨鸣 王保清 李廷帅 易涛 刘慎业 |
| |
| 作者单位： | 1. 中国工程物理研究院激光聚变研究中心,四川绵阳621900;中国工程物理研究院惯约实施管理中心,四川绵阳621900;2. 中国工程物理研究院激光聚变研究中心,四川绵阳,621900;3. 电子科技大学能源科学与工程学院,成都,611731;4. 中国工程物理研究院激光聚变研究中心,四川绵阳621900;电子科技大学能源科学与工程学院,成都611731 |
| |
| 基金项目： | 国家自然科学基金，The National Natural Science Foundation of China |
| |
| 摘 要： | 给出了适用于0.1~5keV的平响应X射线光阴极的设计方案.采用两层不同厚度、相同面积的相同金属材料制备X射线光阴极,两金属层的厚度和微观结构经过优化后,在惯性约束聚变实验感兴趣的能区具有良好的平响应特征,不需要复杂的解谱过程.选取4种不同的光阴极材料,改变厚度和占空比设计,计算得到了光阴极不平整度.模拟结果表明,该光阴极在0.1~5keV能量响应基本一致,不平整度优于5%.
|
| 关 键 词： | 惯性约束聚变 X射线 条纹相机 透射式光阴极 平响应X射线光阴极 |
Theoretical Design and Computational Simulation of Flat Response X-ray Photocathode |
| |
| WANG Chuan-ke,LI Jin,YANG Ming,WANG Bao-qing,LI Ting-shuai,YI Tao,LIU Shen-ye.Theoretical Design and Computational Simulation of Flat Response X-ray Photocathode[J].Acta Photonica Sinica,2017,46(5). |
| |
| Authors: | WANG Chuan-ke LI Jin YANG Ming WANG Bao-qing LI Ting-shuai YI Tao LIU Shen-ye |
| |
| Abstract: | A flat-response X-ray photocathode at the energy range of 0.1 ～ 5 keV was presented.The photocathode consists of two layers of metal material with same area and different thickness.After optimizing the thickness and microstructure of two metal layers,the proposed photocathode does not need complex corrections in the interested X-ray energy range of inertial confinement fusion experiment due to the flat-response characteristics.The flatness of the proposed X-ray photocathode with 4 kinds of materials respectively was simulated by adjusting the material,thickness and duty ratio.The simulation results show that the proposed photocathode has flat-response with flatness better than 5 ％ at the X-ray energy range of 0.1 ～5 keV. |
| |
| Keywords: | Inertial confined fusion X-ray Streak camera Transmission photocathode Flat-response X-ray photocathode |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
