首页 | 本学科首页   官方微博 | 高级检索  
     检索      

干涉仪的微应力安装力学分析以及试验结果
引用本文:李霞,袁艳,赵建科.干涉仪的微应力安装力学分析以及试验结果[J].光子学报,2007,36(5):918-921.
作者姓名:李霞  袁艳  赵建科
作者单位:1. 中国科学院西安,光学精密机械研究所,西安,710068;中国科学院研究生院,北京,100039
2. 北京航空航天大学,北京,100038
3. 中国科学院西安,光学精密机械研究所,西安,710068
摘    要:干涉仪在系统中固定产生的应力会影响干涉条纹的调制度.将干涉仪的非通光面与干涉仪材料性能相同的玻璃平板胶合,做为干涉仪上下面的安装面,可以消除安装过程中对干涉仪产生的应力.选取航天通用的铸钛材料做为支撑件,可以避免恶劣航天环境中金属件热膨胀对干涉仪的破坏,采用XM31胶垫对干涉仪运输过程进行保护.整个装调中采用微应力装调.对整个系统采用工程分析软件进行了理论力学分析.结果表明,这种结构设计是可行的.同时采用2XSA60-T1000-32WL振动台,根据有关规范要求输入振动载荷,进行了力学环境试验.试验前后整个系统干涉图的MTF值基本不变.证明这种干涉仪结构设计以及微应力装调方法在工程应用上是可行的.

关 键 词:微应力装调  干涉仪  调制传递函数MTF  空间调制型成像光谱仪
文章编号:1004-4213(2007)05-0918-4
收稿时间:2006-09-19
修稿时间:2006-09-21

Microstress Installation and Experiment Result of the Interferometer
LI Xia,YUAN Yan,ZHAO Jian-ke.Microstress Installation and Experiment Result of the Interferometer[J].Acta Photonica Sinica,2007,36(5):918-921.
Authors:LI Xia  YUAN Yan  ZHAO Jian-ke
Abstract:A microstress method for installation of the spetial modulated image spectrometer was theoretacally and experimentally studied.A susystem-interferometer subassembly as a part in the imaging spectrometer was designed.In the subassembly, ZTC4 and XM31 were used to protect the interferometer from destroying during the process of installation and transportation .Two parts made by the same material as the interferometer were added to interferometer as the installation surface .The results of dynamics analysis and experiment are also given. By this way no strain is produced and the space environment can be endured by the whole spatially modulated imaging spectrometer.
Keywords:Microstress installation  Interferometer  MTF(modulation transfer function)  Spatially modulated imaging spectrometer
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《光子学报》浏览原始摘要信息
点击此处可从《光子学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号