Tribological Properties of MACs-APS Films

Multiply-alkylated cyclopentanes (MACs) with different molecular structure were deposited on single crystal silicon wafers coated with a thin aminopropyltrimethoxylsilane (APS) film as an adhesive layer to form MACs-APS films. The thickness, wetting behavior and nano-scale morphologies of the films were characterized by means of ellipsometry, contact angle measurement, and atomic force microscopy (AFM). The friction and wear behaviors of the thin films sliding against a Si₃N₄ ball were examined on a UMT-2MT tribometer in a ball-on-disk contact mode. The worn surfaces of the MACs-APS films and the counterpart Si₃N₄ balls were investigated with a scanning electron microscope (SEM). It was found that the water contact angles on the MACs-APS film increased with the MACs alkyl chain-length. The MACs-APS film exhibited higher load-carrying capacity and better friction reduction and anti-wear behavior as compared with the APS film. This is suggested to occur because the APS acts as a strongly bonded lubricant phase and MACs as a mobile lubricant phase in the MACs-APS film. The increase of the chain-length of the alkyl substituent in the MACs compounds resulted in improved tribological properties of MACs-APS film. It is suggested that the longer alkyl chains are much more flexible and can dissipate the mechanical energy during the shearing process more easily than the short chain compounds. MACs with the longer chains have stronger chain-chain interactions and the larger MAC molecules have stronger intermolecular interactions, resulting in the good tribological properties of MACs-APS film.