Influence of Curing Pressure on the Structure and Properties of Epoxy Adhesive Films |
| |
Authors: | Yi Xu Wenfeng Yang Ting Sun Longshao Li Qingru Tang |
| |
Institution: | 1. Civil Aviation Safety Engineering Institute, Civil Aviation Flight University of China, Guanghan, China;2. xuyi99@yeah.net;4. Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China |
| |
Abstract: | The effects of different curing pressures on the structure and properties of bisphenol A type epoxy adhesive film (METLBOND 1515-4, Cytec Industries Inc. Germany) were investigated by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA), nano-indentation analysis, and tensile testing. When the curing pressure was increased from 0?MPa to 0.5?MPa FTIR showed that more rigid carbonyl groups were found in the polymers. In addition, the microscopic and macroscopic mechanical properties of the cured adhesive films were improved. Nano-indentation analysis showed that the elastic modulus of the cured product increased significantly, from 2.92?GPa to 3.49?GPa. However, the tensile tests showed that the breaking-elongation increased only slightly, from 3.10% to 3.73%, when the curing pressure was increased from 0?MPa to 0.5?MPa. DMA results showed that the crosslinking densities of the cured epoxy films were improved by the increased curing pressure. These results indicated that a higher modulus of the cured product could be gained by increasing the curing pressure appropriately. |
| |
Keywords: | cross-linking density curing pressure epoxy adhesive film mechanical properties nano-indentation analysis |
|
|