首页 | 本学科首页   官方微博 | 高级检索  
     检索      

光催化反应器性能参数及其简便测试方法
引用本文:杨瑞,张寅平.光催化反应器性能参数及其简便测试方法[J].工程热物理学报,2003,24(2):310-312.
作者姓名:杨瑞  张寅平
作者单位:清华大学建筑技术科学系,北京,100084
基金项目:国家自然科学基金资助项目(No.50276033),清华大学基础研究基金资助项目(No.200007005)
摘    要:本文分析了光催化反应器降解有机挥发化合物(VOCs)的特性,提出了反应器总降解常数的概念,提出了一种测量光催化反应器性能参数-传质单元数、反应有效度和总降解常数的方法。管状光催化反应器降解空气中微量甲醛的实验验证了该方法的可行性。实验表明:在空气温度22-24℃,空气湿度40%附近,甲醛的光催化反应在不同浓度区间近似为一次反应,在1.6-12.4 mg/m3浓度区间内其总降解常数最大。

关 键 词:光催化反应器  性能参数  测试方法  有机挥发化合物  甲醛
文章编号:0253-231X(2003)02-0310-03
修稿时间:2002年11月22

PERFORMANCE PARAMETERS FOR PHOTOCATALYTIC REACTOR AND A CONVENIENT METHOD FOR MEASURING THEM
YANG Rui ZHANG Yin-Ping.PERFORMANCE PARAMETERS FOR PHOTOCATALYTIC REACTOR AND A CONVENIENT METHOD FOR MEASURING THEM[J].Journal of Engineering Thermophysics,2003,24(2):310-312.
Authors:YANG Rui ZHANG Yin-Ping
Abstract:The characteristics of photocatalytic reactor decomposing volatile organic compounds are analyzed. A new parameter, total removing factor of VOC for photocalatytic reactor, is put forward. A convenient method of measuring it and the number of mass transfer units, the reaction effectiveness of such reactor is presented. The method is validated with the experimental results of a tubular photocatalytic reactor decomposing dilute formaldehyde in the air. It is found that the reaction can be regarded as first-order, and the total removing factor is largest when formaldehyde concentration is in the range 1.6-12.4 mg/m3 under the experiment conditions.
Keywords:photocatalytic reactor  performance parameters  measuring method  volatile organic compounds  formaldehyde
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号