首页 | 本学科首页   官方微博 | 高级检索  
     检索      

关于1+1/2对转涡轮的基本分析和初步设计
引用本文:季路成,钟文涛,徐建中.关于1+1/2对转涡轮的基本分析和初步设计[J].工程热物理学报,2001,22(2):167-170.
作者姓名:季路成  钟文涛  徐建中
作者单位:1. 中国科学院工程热物理研究所,
2. 中国南方航空股份有限公司海南分公司,
基金项目:中国科学院知识创新工程资助项目,国家自然科学基金资助项目!(No.59906012),国家重点基础研究发展规划资助项目!(No
摘    要:1+1/2(无低压导叶)对转涡轮是高性能军用发动机迫切需要的关键技术之一。本文针对该类对转涡轮展开基本分析,并以某型发动机为目标进行了 1+1/2对转涡轮试验件的初步设计。研究表明 1+1/2对转涡轮总效率更多由第一级决定,第二级效率一般较高;高低压轴出功比和第一级涡轮的负荷水平是表征此类涡轮设计难易程度的关键参数。

关 键 词:对转涡轮  涡轮设计  航空发动机
文章编号:0253-231X(2001)02-0167-04
修稿时间:2000年12月9日

PRIMARY ANALYSIS AND DESIGN OF A VANELESS COUNTER-ROTATING TURBINE
JI Lu-Cheng,ZHONG Wen-Tao,XU Jian-Zhong.PRIMARY ANALYSIS AND DESIGN OF A VANELESS COUNTER-ROTATING TURBINE[J].Journal of Engineering Thermophysics,2001,22(2):167-170.
Authors:JI Lu-Cheng  ZHONG Wen-Tao  XU Jian-Zhong
Abstract:Vaneless Counter-Rotating Turbine (VCRT) is one of the key defense technologies. A primary analysis about this kind of counter-rotating turbine is presented, also a primary design is conducted. Results show that the total efficiency of VCRT is determined mainly by the high-pressure turbine stage. Generallyl the second stage, namely low-pressure stage, has higher efficiency. Specific work ratio between high-pressure shaft and low-pressure shaft and load level of high-pressure turbine represent the difficulties fronted in process of designing a VCRT.
Keywords:counter-rotating turbine  turbine design  aero-engine  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号