| 液体喷射抛光时各工艺参数对材料去除量的影响 |
| |
| 引用本文： | 方慧,郭培基,余景池.液体喷射抛光时各工艺参数对材料去除量的影响[J].光学技术,2004,30(4):440-442. |
| |
| 作者姓名： | 方慧 郭培基 余景池 |
| |
| 作者单位： | 苏州大学,现代光学技术研究所,江苏,苏州,215006 |
| |
| 基金项目： | 国家自然科学基金资助项目(60278011) |
| |
| 摘 要： | 以实验为基础,研究了液体喷射抛光技术的各工艺参数,包括喷射角、工作压力、工作距离和作用时间等参量对工件材料去除的影响。获得了它们之间的关系曲线;得出了工件材料去除的规律;确定了液体喷射抛光时的最佳参数组合。为进一步研究液体喷射抛光时各工艺参数对工件表面粗糙度的影响奠定了基础。
|
| 关 键 词： | 喷射 抛光 去除率 剪切 |
| 文章编号： | 1002-1582(2004)04-0440-03 |
| 修稿时间： | 2003年9月29日 |
Effect on material removal rate of fluid jet polishing by several parameters |
| |
| FANG Hui,GUO Pei-ji,YU Jing-chi.Effect on material removal rate of fluid jet polishing by several parameters[J].Optical Technique,2004,30(4):440-442. |
| |
| Authors: | FANG Hui GUO Pei-ji YU Jing-chi |
| |
| Abstract: | Based on experiment, the influence of the process parameters of fluid Jet polishing (FJP), including working pressure, working distance, jet angle and working time etc, on the removal rate of the workpiece is investigated. Then the relation curve between every parameter and the removal amount is obtained, and the rules of material remove are summarized. According to the experimental results, the best parameters of FJP are obtained. |
| |
| Keywords: | fluid jet polishing removal rate shear |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
