| 激光熔覆TiC-Ni复合涂层的摩擦磨损性能和磨损机制研究 |
| |
| 引用本文： | 高焕明,陈超英.激光熔覆TiC-Ni复合涂层的摩擦磨损性能和磨损机制研究[J].光学技术,2009,35(4). |
| |
| 作者姓名： | 高焕明 陈超英 |
| |
| 作者单位： | 1. 天津大学,机械工程学院,天津,300072;天津航海仪器研究所,天津,300131
2. 天津大学,机械工程学院,天津,300072 |
| |
| 摘 要： | 利用光学显微镜和扫描电镜观察了钛合金表面TiC-Ni激光熔覆层的宏观形貌和微观组织,测试了激光熔覆层的硬度、摩擦系数和磨损量。利用SEM观察了磨损的表面形貌和磨屑的形貌,分析了激光熔覆层的磨损机制。结果表明:激光熔覆层组织致密,无气孔和裂纹,硬度为基材的3倍;激光熔覆层的摩擦系数随环境压力的降低而提高,磨损量随环境压力的降低、法向载荷的增加而增加;低载时为轻微的磨粒磨损,高载时为严重的剥层磨损。
|
| 关 键 词： | 激光熔覆 TiC-Ni复合涂层 真空环境 摩擦磨损性能 磨损机制 |
Wear property and mechanism of laser cladding TiC-Ni composite coating |
| |
| GAO Huan-ming,CHEN Chao-ying.Wear property and mechanism of laser cladding TiC-Ni composite coating[J].Optical Technique,2009,35(4). |
| |
| Authors: | GAO Huan-ming CHEN Chao-ying |
| |
| Institution: | GAO Huan-ming1,2,CHEN Chao-ying1(1.School of Mechanical Engineering,Tianjin University,Tianjin 300072,China)(2.Tianjin Navigation Instruments Research Institute,Tianjin 300131,China) |
| |
| Abstract: | The macrostructure of the TiC-Ni laser cladding coating on Ti alloy are characterized using an optics microscope and a scanning electron microscope.The microhardness,friction coefficient and wear mass loss of the laser cladding coating are examined.The worn surface and worn debris are observed by SEM,and the wear mechanisms are discussed.The results show that the laser cladding coating is dense without pores and cracks.The microhardness is three times higher than that of substrate.The friction coefficient o... |
| |
| Keywords: | laser cladding TiC-Ni composite coating vacuum environment wear property wear mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
