首页 | 本学科首页   官方微博 | 高级检索  
     检索      

激光熔覆TiC陶瓷涂层的组织和摩擦磨损性能研究
引用本文:孙荣禄,杨贤金.激光熔覆TiC陶瓷涂层的组织和摩擦磨损性能研究[J].光学技术,2006,32(2):287-289.
作者姓名:孙荣禄  杨贤金
作者单位:1. 天津工业大学,机械电子学院,天津,300160;天津大学,材料科学与工程学院,天津,300072
2. 天津大学,材料科学与工程学院,天津,300072
基金项目:天津市自然科学基金资助项目(043603211)
摘    要:采用激光熔覆技术在TC4合金表面上制备了TiC陶瓷涂层,分析了熔覆层的微观组织,测试了熔覆层的硬度和摩擦磨损性能。结果表明:TiC激光熔覆层分为熔覆区和稀释区两个区域,熔覆区未受到基底的稀释,由TiC颗粒和TiC树枝晶组成;稀释区受到了基底的稀释,由TiC树枝晶和钛合金组成;TiC激光熔覆层的显微硬度在HV700~1500之间,明显地改善了TC4合金表面的摩擦和磨损性能。

关 键 词:激光熔覆  TiC陶瓷涂层  显微组织  显微硬度  摩擦磨损性能
文章编号:1002-1582(2006)02-0287-03
收稿时间:2005/3/8
修稿时间:2005年3月8日

Microstructure and friction wear properties of TiC laser clad layer
SUN Rong-lu,YANG Xian-jin.Microstructure and friction wear properties of TiC laser clad layer[J].Optical Technique,2006,32(2):287-289.
Authors:SUN Rong-lu  YANG Xian-jin
Abstract:Laser cladding of Ti-6Al-4V alloy with TiC powders was carried out,and microstructure,microhardness,friction and wear properties of the laser clad layers were examined. The results show that the TiC laser clad layer is divided into two regions: clad zone and dilution zone. Clad zone which is not diluted by substrate is made up of TiC particles and TiC dendrites;dilution zone diluted by the substrate is made up of TiC dendrites and Ti alloy. The microhardness HV of the clad layer is 700~1500,and decreases ladderlikly from the surface to the interior. TiC laser clad layer enhances greatly the friction and wear properties of Ti-6Al-4V alloy.
Keywords:laser cladding  TiC ceramic coating  microstructure  microhardness  friction and wear properties
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号