首页 | 本学科首页   官方微博 | 高级检索  
     检索      

钛合金表面激光熔覆TiC_p/Ni基合金复合耐磨涂层
引用本文:孙荣禄,王云山,杨洗陈,刘勇,杨德庄.钛合金表面激光熔覆TiC_p/Ni基合金复合耐磨涂层[J].光学技术,2003,29(5):625-627.
作者姓名:孙荣禄  王云山  杨洗陈  刘勇  杨德庄
作者单位:1. 天津工业大学,激光工程中心,天津,300160
2. 哈尔滨工业大学,材料科学与工程学院,哈尔滨,150001
摘    要:采用激光熔覆技术在TC4合金表面制备TiC颗粒增强的Ni基合金复合材料涂层,测试了熔覆层的硬度和滑动摩擦磨损性能,分析了熔覆层的强化机制。结果表明,熔覆层中存在颗粒强化、固溶强化和细晶强化等多种强化作用,熔覆层的显微硬度达HV900~1100,耐磨性能比TC4合金显著提高。

关 键 词:钛合金  激光熔覆  TiCp/Ni基合金复合涂层  磨损性能  强化机制
文章编号:1002-1582(2003)05-0625-03
修稿时间:2002年12月30

Laser cladding of wear-resistant TiCp/Ni-base alloy composite layer on the surface of titanium alloy
Abstract:Laser cladding of TiC-NiCrBSi composite layer on TC4 alloy substrate i s carried out, and the microhardness and sliding friction and wear properties of the clad layer are measured. The results showed that, the laser clad layer is r einforced by particles, solution, and grain-refining, which obtained a microhar d ness of HV900-1100 and a remarkable increase in wear resistance comparing with TC4 alloy.
Keywords:Titanium alloy  laser cladding  TiC_p/Ni-base alloy composite layer  wear prop erty  reinforce mechanism
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号