首页 | 本学科首页   官方微博 | 高级检索  
     检索      

合金钢封装光纤Bragg光栅传感器传感特性的研究
引用本文:王宇,刘铁根,刘丽娜,江俊峰.合金钢封装光纤Bragg光栅传感器传感特性的研究[J].光学技术,2006,32(6):923-925.
作者姓名:王宇  刘铁根  刘丽娜  江俊峰
作者单位:天津大学,精密仪器与光电子工程学院光电信息技术科学教育部重点实验室,天津,300072
摘    要:提出了一种光纤光栅新型合金钢封装结构。利用等强度悬臂梁和温度控制箱对合金钢封装光纤布拉格光栅的应力和温度传感特性进行了测量。实验表明,采用该种封装的光纤光栅传感器保持了裸光纤光栅的响应灵敏度,其拉应变灵敏度系数为1.17pm/με,压应变灵敏度系数为1.2pm/με,温度灵敏度系数为11.3pm/℃,线性响应度在0.9995以上,可满足实际应用的要求。

关 键 词:光纤布拉格光栅  合金钢封装  传感特性
文章编号:1002-1582(2006)06-0923-03
收稿时间:2005/10/20
修稿时间:2005年10月20

Study on fiber Bragg grating sensor encapsulated by the alloyed steel
WANG Yu,LIU Tie-gen,LIU Li-na,JIANG Jun-feng.Study on fiber Bragg grating sensor encapsulated by the alloyed steel[J].Optical Technique,2006,32(6):923-925.
Authors:WANG Yu  LIU Tie-gen  LIU Li-na  JIANG Jun-feng
Abstract:A new configuration of fiber grating sensor encapsulated by alloyed steel is presented,and its strain and temperature sensing properties are investigated by beam of constant strength and temperature controller. Experimental results show that this kind of FBG sensor doesn't change the response sensitivity of bare FBG,its pull strain sensitivity is 1.17pm/με,press strain sensitivity is 1.2pm/με,temperature sensitivity is 11.3pm/℃,and its linear response is higher than 0.9995,which can meet the application requirement.
Keywords:fiber Bragg grating(FBG)  encapsulation with alloyed steel  sensing property
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号