Challenges for turbulent combustion

Turbulent combustion will remain central to the next generation of combustion devices that are likely to employ blends of renewable and fossil fuels, transitioning eventually to electrofuels (also referred to as e-fuels, powerfuels, power-to-x, or synthetics). This paper starts by projecting that the decarbonization process is likely to be very slow as guided by history and by the sheer extent of the current network for fossil fuels, and the cost of its replacement. This transition to renewables will be moderated by the advent of cleaner engines that operate on increasingly cleaner fuel blends. A brief outline of recent developments in combustion modes, such as gasoline compression ignition for reciprocating engines and sequential combustion for gas turbines, is presented. The next two sections of the paper identify two essential areas of development for advancing knowledge of turbulent combustion, namely multi-mode or mixed-mode combustion and soot formation. Multi-mode combustion is common in practical devices and spans the entire range of processes from transient ignition to stable combustion and the formation of pollutants. A range of burners developed to study highly turbulent premixed flames and mixed-mode flames, is presented along with samples of data and an outline of outstanding research issues. Soot formation relevant to electrofuels, such as blends of diesel-oxymethylene ethers, hydrogen-methane or ethylene-ammonia, is also discussed. Mechanisms of soot formation, while significantly improved, remain lacking particularly for heavy fuels and their blends. Other important areas of research, such as spray atomization, turbulent dense spray flames, turbulent fires, and the effects of high pressure, are briefly mentioned. The paper concludes by highlighting the continued need for research in these areas of turbulent combustion to bring predictive capabilities to a level of comprehensive fidelity that enables them to become standard reliable tools for the design and monitoring of future combustors.