| 铜纳米阵列高效电解水产氧催化剂的制备 |
| |
| 引用本文： | 熊伟麟,Muhammad Imran Abdullah,马明明.铜纳米阵列高效电解水产氧催化剂的制备[J].化学物理学报,2018,31(6):806-812. |
| |
| 作者姓名： | 熊伟麟 Muhammad Imran Abdullah 马明明 |
| |
| 作者单位： | 中国科学技术大学化学系，中国科学院软物质重点实验室，能源材料化学协同创新中心，合肥 230026,中国科学技术大学化学系，中国科学院软物质重点实验室，能源材料化学协同创新中心，合肥 230026,中国科学技术大学化学系，中国科学院软物质重点实验室，能源材料化学协同创新中心，合肥 230026 |
| |
| 基金项目： | This work was supported by the National Natural Science Foundation of China (No.21474094 and No.21722406). Muhammad Imran Abdullah acknowledges the Chinese Academy of Science (CAS) and TWAS for supporting him for a Ph.D. degree from University of Science and Technology of China in the category of 2016 CAS-TWAS President’s Fellowship Awardee (Series No.2016-171). |
| |
| 摘 要： | 本文报道了一种利用简单的两步牺牲模板法，在泡沫铜基底表面完成了三维氧化铜纳米晶阵列的生长. 氧化铜纳米晶阵列具有良好的导电性，稳定性，在碱性溶液中有着优秀的电解水产氧催化性能. 氧化铜纳米晶阵列催化水的电化学氧化只需400 mV的过电势即可达到100 mA/cm2的电流密度，与其它铜基电解水产氧催化剂以及贵金属IrO2相比都有着明显的优势. 氧化铜纳米晶阵列在270 mA/cm2左右的工作电流下连续工作10 h依然可以保持良好的稳定性，是相同的工作电压下IrO2工作电流的10倍(约25 mA/cm2).
|
| 关 键 词： | 纳米催化剂，氧化铜，电化学产氧 |
| 收稿时间： | 2018/5/25 0:00:00 |
Electrosynthesis of CuO Nanocrystal Array as a Highly Efficient and Stable Electrocatalyst for Oxygen Evolution Reaction |
| |
| Wei-lin Xiong,Muhammad Imran Abdullah and Ming-ming Ma.Electrosynthesis of CuO Nanocrystal Array as a Highly Efficient and Stable Electrocatalyst for Oxygen Evolution Reaction[J].Chinese Journal of Chemical Physics,2018,31(6):806-812. |
| |
| Authors: | Wei-lin Xiong Muhammad Imran Abdullah and Ming-ming Ma |
| |
| Institution: | CAS Key Laboratory of Soft Matter Chemistry, iChEM (Innovation Center of Chemistry for Energy Materials), Department of Chemistry, University of Science and Technology of China, Hefei 230026, China,CAS Key Laboratory of Soft Matter Chemistry, iChEM (Innovation Center of Chemistry for Energy Materials), Department of Chemistry, University of Science and Technology of China, Hefei 230026, China and CAS Key Laboratory of Soft Matter Chemistry, iChEM (Innovation Center of Chemistry for Energy Materials), Department of Chemistry, University of Science and Technology of China, Hefei 230026, China |
| |
| Abstract: | Electrodeposition of active catalysts on electrodes appears as a convenient approach to prepare non-noble-metal based electrocatalysts with defined micro- and nano-structures. Herein we report a new strategy of fabricating a 3-D hierarchical CuO nanocrystal array (CuO NCA) on Cu foam through a two-step sacrifice-template method. This CuO NCA possesses high conductivity, great stability, and impressive catalytic activity for oxygen evolution reaction (OER) in alkaline electrolytes. The CuO NCA can achieve a high current density of 100 mA/cm2 at a relatively low overpotential of 400 mV for OER, which shows a better performance than other Cu-based OER catalysts and IrO2. The high activity of CuO NCA is well retained during a 10-h OER test at a high current density around 270 mA/cm2, which is about 10 times higher than the current density achieved by IrO2 (around 25 mA/cm2) with the same applied overpotential. According to our best knowledge, CuO NCA is currently the most efficient and stable Cu-based electrocatalyst for water oxidation in alkaline electrolytes. |
| |
| Keywords: | Nano catalyst Copper oxide Oxygen evolution reaction |
|
| 点击此处可从《化学物理学报》浏览原始摘要信息 |
| 点击此处可从《化学物理学报》下载免费的PDF全文 |
