太赫兹波段Smith-Purcell辐射的介质加载光栅高频特性

提出了一种用于Smith-Purcell效应器件的介质加载光栅慢波结构,通过研究该结构的注-波互作用过程,推导出带电子注的色散方程,并数值求解出波的线性增长率.利用色散方程,结合电磁场传播的边界条件,推导出Smith-Purcell效应振荡器工作所需的起振电流.详细研究了高频结构长度、电子注主要参数和介质相对介电常数对起振电流的影响,并与普通金属光栅结构进行了比较.结果表明:保持其他参数不变时,高频结构长度越短,起振电流越大;保持高频结构参数不变时,起振电流随电子注厚度和注-栅距离的增大而增大,随电子注电压的增大而减小;与金属光栅相比,介质的引入提高了注-波互作用的增长率,有效减小了振荡器的起振电流.理论计算结果与软件CHIPIC的模拟结果比较符合.

High frequency characteristics of dielectric-loaded grating for terahertz Smith-Purcell radiation

The research on a Smith-Purcell device becomes active since it holds promise in developing a high power, tunable, and compact terahertz radiation source. In this paper, a dielectric loaded grating for Smith-Purcell device is proposed. By investigating the interaction between the sheet electron beam and surface wave above the grating, the dispersion equation with electron beam is derived, in which the electron beam has a finite thickness. And then the growth rate of the beam-wave interaction is numerically calculated from the dispersion equation. In addition, the current threshold for oscillators, known as a start current, is carefully estimated from the dispersion equation by considering the boundary conditions of electromagnetic field. The effects of structure length, electron beam parameters and dielectric constant on start current are analyzed at length. The results reveal that the start current decreases as the structure length increases. This is because as the structure length becomes greater, the distance of the beam-wave interaction becomes longer, which can strengthen the beam-wave interaction. And with increasing beam thickness and beam-grating distance, the start current increases. Because the electric field of the surface wave decreases exponentially with the increase of distance from the grating, the electron beam far from the grating cannot be bunched by the field, which makes it harder for Smith-Purcell device to oscillate. However, as the beam voltage becomes greater, the start current decreases first quickly and then slightly. Compared with the case of metal grating, it can be seen that the use of dielectric can improve the growth rate and reduce the start current for the operation of a Smith-Purcell backward wave oscillator. The start current decreases quickly when the dielectric constant is greater than 1. Then it increases slightly when dielectric constant is between 2 and 3, and finally the start current continues to decrease. But it cannot be helpful to choose a very big value of dielectric in order to obtain a low start current, because the operation frequency decreases as dielectric constant increases. It is more appropriate to choose a dielectric constant in a required frequency range. The predictions of our theory and the results from the particle-in-cell simulation are consistent with each other, which verifies the validity and accuracy of the theory in this paper.