激光调频连续波测距的精度评定方法研究

基于双光纤光路等光频重采样原理,提出了一种距离精度的评定方法.通过推导噪声背景下等光频重采样信号中距离参量的克拉美-罗下边界,得到了影响系统测距精度的两个重要因素:信噪比和扫描带宽,并进行了实验验证.实验表明,该评价方法并不会受到任何距离估算方法的影响,根据此方法可以选择一个最优的距离估算方法.通过对两个影响精度的因素进行仿真分析可知,在扫描带宽为2.2 nm时,若将测量光路的信噪比提升至70 dB以上,系统可获得低于10μm的测距精度.该精度评定方法可为后续改善调频连续波测距系统性能提供理论参考.

Precision evaluation method of measuring frequency modulated continuous wave laser distance

With the rapid development of industrial manufacturing, people are stricter and stricter for measuring accuracy and demanding for measurable objects. The demand for a new generation of industrial measurement has evolved from the cooperative target toward the diffuse surface object with faster measurement speed and higher precision. Frequency modulated continuous wave (FMCW) laser ranging technology has proved to be an efficient method in the high-precision ranging fields for absolute distance measurement of a diffuse reflecting target.
However, its accuracy is subjected to the stability of continuous-wave light source which cannot scan frequency linearly, which further leads to the instability of beat frequency and poor spectrum resolution. Generally, this problem could be solved by the active linearization technique and the post-processing technique. The most popular method is the non-uniform interval resampling technique, which belongs to the post-processing scheme and uses the zero-crossings or peaks of a long delay Mach-Zehnder interferometer signal as triggers for acquiring the measurement signal data. This technique is low cost, easy to be integrated into FMCW ladar system, and especially suitable for short-range small-band scanning measurements. However, in the large-bandwidth long-distance measurement cases, due to the jitter and dispersion of a long fiber, the spectrum obtained by this method is deteriorated such as the spectral broadening and distance shifting, so the range position cannot be determined precisely. To improve the precision, the fast Fourier transform, chirp Z transform and the multiple signal classification methods are used to obtain the distance spectral information. There are also other methods to solve this problem, but there is no common precision evaluation method to test the validities of these methods.
In this paper, a precision evaluation method of measuring the FMCW absolute distance based on two-fiber interferometer is presented. A lower Cramer-Rao lower bound on the variance of distance parameter of the resampled signal in the presence of noise is derived. It shows that the precision of absolute distance is affected by the signal-to-noise ratio of the system and chirp bandwidth. This result is verified experimentally.
Besides, the proposed method is not restricted to any distance estimation algorithm. According to this boundary, an optimal distance estimation method could be chosen. Moreover, a simulation of range precision versus signal-to-noise ratio and bandwidth is also demonstrated. When the chirped bandwidth is equal to 20 nm and the signal-to-noise ratio of absolute distance measurement interferometer is raised to more than 70 dB, the obtained precision is below 1 μm. This method can provide a theoretical reference for improving the precision of FMCW distance measurement and it could be widely used in the future.